Bedienungsanleitung AEG BHG 500W (Seite 12 von 48) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

648322

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Operation - for users and contractors

3. Appliance description

This appliance has been designed as a booster heater

and is particularly suitable for bathrooms, as well as dry-

ing and warming bathrobes and towels. You can place

your towels at various heights.

The appliance heats the room through natural convection

and radiated warmth. The integral room thermostat keeps

the room at the set temperature. For this, it is important

that the appliance's heating output matches the room's

heat demand. This only applies if no towels or bathrobes

are hung on the appliance.

The boost function enables the appliance to be operated

at full heating output without temperature control for a

limited period of 2 hours. You can program the time at

which the appliance starts automatically every day.

The appliance is ready for operation when it has been

xed to the wall and plugged into the mains.

4. Operation

4.1 User interface description

You operate the appliance by means of its user interface.

26_07_80_0050

1 2

5 3

1 ON/OFF indicator

2 Heat indicator

3 Temperature selector

4 "24h auto" setting range

5 Rotary selector

4.2 Switching the appliance on

» Set the mode selector to "ON".

» Set the required room temperature with the temper-

ature selector. You can choose between 10 °C and

30 °C.

The heat indicator lights up when the appliance starts to

heat. The heat indicator goes off when the temperature

set at the temperature selector is reached.

Note

If several appliances are installed in one room, a

different temperature can be set at each one.

Note

To avoid excessive power consumption when win-

dows are open, stop the appliance while venting.

4.3 2 h boost function

Enable

» Switch the appliance on.

» Press the mode selector for about a second.

The ON/OFF indicator and the heat indicator illuminate.

The appliance heats for 2 hours at full output.

At the end of the 2 hours, the appliance returns to stand-

ard operation with the temperature selector. The heat

indicator and ON/OFF indicator extinguish.

Disable

» Press the mode selector for about a second.

The heat indicator and ON/OFF indicator extinguish. The

appliance returns to normal operation controlled by the

temperature selector.

4.4 24 h automatic function

The 24 h automatic function repeats the 2 h boost function

automatically every 24 hours.

Enable

Turn the mode selector fully clockwise to "24 h auto".

The ON/OFF indicator and the heat indicator illuminate.

The appliance heats for 2 hours at full output.

At the end of the 2 hours, the appliance returns to stand-

ard operation with the temperature selector. The heat

indicator and ON/OFF indicator extinguish.

The 2h boost function starts the following day 45 minutes

before the time when the appliance was set to "24h auto".

Example:

You would like your bathroom to be at the required tem-

perature at 07:00 h in the morning.

» On the rst day at 07:00 h in the morning, set the ro-

tary selector to "24h auto".

The appliance immediately starts heating as per the 2 h

boost function. The next day, the 2h boost function auto-

matically starts at 06:15 h in the morning, in order to heat

up the bathroom for 07:00 h.

Interruption

You can interrupt the 2 h boost function at any time with-

out changing the start time.

» Press the mode selector for about a second.

The heat indicator and ON/OFF indicator extinguish. The

appliance returns to normal operation controlled by the

temperature selector.

On the following day the 2 h boost function will resume

from the usual start time.

Disable

» Turn the mode selector fully anti-clockwise to "ON".

The heat indicator and ON/OFF indicator extinguish. The

appliance returns to normal operation controlled by the

temperature selector.

4.5 Childproong

This function prevents the temperature setting from being

changed unintentionally.

If the childproof setting is active, the temperature and

mode selectors are not operational. The ON/OFF indica-

tor ashes if you adjust the mode selector/temperature

selector.

Enable

» Press and hold the mode selector for more than

three seconds.

The ON/OFF indicator ashes consecutively ve times.

This tells you that the childproof setting is active.

You can also use the 2 h boost function as usual when

childproong has been enabled.

Disable

» Press and hold the mode selector for more than

three seconds.

The ON/OFF indicator ashes consecutively ve times.

This tells you that the childproof setting is disabled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG BHG 500W Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info