Bedienungsanleitung AEG BSE882220M (Seite 44 von 52) (Englisch)

657795

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

11.4 Steam Cleaning

Remove as much dirt as possible

manually.

Remove the accessories and the shelf

support to clean the side walls.

The steam cleaning functions support

the steam cavity cleaning of the

appliance.

For a better performance

you should start the cleaning

function when the appliance

is cool.

The specified time is related

to the duration of the

function and does not

include the time required for

cleaning of the cavity by the

user.

When the steam cleaning function is

active, the light is off.

1. Fill the water drawer to the maximum

level (around 950 ml of water) until

the acoustic signal sounds or the

display shows the message.

2. Choose the steam cleaning function

in the menu: Cleaning.

Steam Cleaning - the duration of the

function is around 30 minutes.

a) Activate the function.

b) An acoustic signal sounds when

the programme is completed.

c) Press the rotary knob to

deactivate the signal.

Steam Cleaning Plus - the duration

of the function is around 75 minutes.

a) Spray a suitable detergent

uniformly in the oven cavity on

both enamel and steel parts.

Before you start the cleaning

procedure, make sure that the

appliance is cold.

b) Activate the function.

After around 50 minutes an

acoustic signal sounds when the

first part of the programme is

completed.

c) Wipe the internal surface of the

appliance with a non-abrasive

surface care sponge. You can use

warm water or oven detergents

to clean the cavity.

The final part of the procedure

starts. The duration of this stage

is around 25 minutes.

3. Wipe the internal surface of the

appliance with a non-abrasive

sponge. You can use warm water to

clean the cavity.

After cleaning keep the appliance door

open for approximately 1 hour. Wait until

the appliance is dry. To speed up the

drying you can heat up the appliance

with hot air at temperature 150 °C for

approximately 15 minutes. You can get

maximum effects of the cleaning function

if you manually clean the appliance

immediately after the function ends.

11.5 Cleaning Reminder

When reminder is displayed cleaning is

necessary. Perform the function Steam

Cleaning Plus.

11.6 Steam generation system

- Descaling

When the steam generator operates,

there is an accumulation and deposition

of limestone inside because of calcium

contents in the water. This can have a

negative effect on the steam quality, on

the performance of the steam generator

and on the food quality. To prevent this,

clean the steam generation circuit from

residual stone.

Remove all accessories.

Select the function from the menu:

Cleaning. The user interface will guide

you through the procedure.

The duration of the complete procedure

is about 2 hours.

The light in this function is off.

1. Make sure that the water drawer is

empty.

2. Press

3. Put the grill- / roasting pan on the

first shelf position.

4. Press the rotary knob.

5. Put 250 ml of the descaling agent in

the water drawer.

6. Fill the remaining part of the water

drawer with water to the maximum

www.aeg.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG BSE882220M Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von AEG BSE882220M

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info