Bedienungsanleitung AEG BSS 4801 (Seite 27 von 46) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

546345

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

English

Due to the different device manufacturers, models, and

software versions, a full functionality cannot be guaranteed.

• Loggingondevices(Pairing)

Before you listen to music via the unit, you must pair the

devices.

1. Ensure, that the Bluetooth function is activated in

your player (e.g. mobile phone). For this, refer to the

operation manual of your player.

2. Afterturningiton,theindicatorlamp(6)willashto

show that the device is in pairing mode.

3. Keep the

button(7)presseddownforapprox.3

seconds. You will hear two beeps. The devices can

now be connected to one another.

4. Chose the Bluetooth menu in your player and

operation manual of your player. The device “AEG

BSS 4801” will show in your player as a selection.

NOTE:

Only one playback unit can be connected to the

speaker. If the speaker is already connected to

another playback unit, the speaker will not appear

in the BT selection menu.

5. Now enter the password “0000” in your player,

depending on the device manufacturers, model, and

software version.

If pairing was done successfully, you will hear a beep and the

indicator lamp (6) will light up.

For the further procedure, please refer to the user manual

of the playback unit. If possible, adjust the volume of the

externalunittoacomfortablelevel.

NOTE:

• Dependingonthedevicemanufacturer,youneedto

perform the registration (PAIRING) again to connect the

devices

• Ifyouhaveproblemsinpairingaplaybackdevice,

deactivate the WiFi function / mobile data function in

your playback device.

• TheBluetoothcompatibilitycannotbeensuredfor

devices (e.g. mobile phones) getting released in the

future.

• Toensureanoptimalconnection,makesurethatthe

battery of your player is completely charged.

• Someofthemobilephonebrandshaveanenergy-sav-

ing mode. Deactivate the energy-saving mode as it can

otherwise result in problems during the data transfer

through Bluetooth.

• Tobeabletotransferaudiodata,Bluetoothneedsto

stay activated in your player Observe the operation

manual of your player.

NOTE:

• Ifamobilephoneonwhichyouareplayingmusic

receives a call, the music will be interrupted. The sound

however is not played back via the speaker. After you

have ended the call, the devices are connected to

each other again and playback continues. The volume

increases slowly.

• Reconnecting devices

This device is designed to support automatic re-connec-

tion.

The following conditions must be met:

- the devices need to have been paired with each

other before

- Bluetooth is activated in your player

- your player supports this function

The automatic reconnection will be activated after the de-

vice has been switched on. This may last a few seconds.

If the registration has been successful, a beep will sound

and the indicator light (6) will light up.

Cleaning

CAUTION:

Do not submerge the device in water.

• Beforecleaningdisconnectfrommainspowersupply.

• Cleanthedevicewithasoftdampclothwithoutdeter-

gents.

Troubleshooting

Fault Cause Solution

Unit cannot be

operated.

Unit crashes

and “hangs”.

Disconnect from the

mains for around 5 sec-

onds. Then switch the unit

on again.

No audio signal

via the Bluetooth

connection

Speaker is not

paired to the

audio source.

Check whether a connec-

tionexists.Ifnecessary,

pair the speaker again to

the audio source.

Volume too

low

Increase the volume on

the speaker

Increase the volume on

the audio source.

Audio cable is

connected

Remove the cable from

the AUX IN socket (2).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG BSS 4801 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info