Bedienungsanleitung AEG BSS 4823 (Seite 39 von 66) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

546323

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

English

Memory card slot (6)

1. Use the INPUT button (10) to select SD CARD mode.

2. Insert the memory card with the contacts facing up into

the appropriate slot. Playback will start after a few sec-

onds. The AUX indicator lamp ﬂashes during playback.

For operation of the device, please refer to chapter “Descrip-

tion of the Controls”.

CAUTION:

Select another operating mode before removing the

memory card.

Description of the controls

NOTE:

Depending on your playback unit, not all functions might

be supported.

(7)

You can pause and continue music playback. Press again to

continue playback.

(9)

Press1x= Restartofthesongfromthebeginning.(Not

during USB/CARD mode)

Press2x= Skiptotheprevioussong.

Press3x= Skiptothesongbeforetheprevioussong.

(8)

Presstoskiptothenextsongandthefollowingsongs.

Cleaning

CAUTION:

Do not submerge the device in water.

• Beforecleaningdisconnectfrommainspowersupply.

• Cleanthedevicewithasoftdampclothwithoutdeter-

gents.

Troubleshooting

Fault Cause Solution

Unit cannot

be operated.

Unit crashes and

“hangs”.

Disconnect from the

mains for around

5 seconds. Then

switch the unit on

again.

Fault Cause Solution

No audio

signal via the

Bluetooth

connection

Speaker is not paired

to the audio source.

Check whether a

connectionexists.If

necessary, pair the

speaker again to the

audio source.

Volume too low Increase the volume

on the speaker.

Increase the volume

on the audio source.

Speaker

cannot be

connected

Pairing does not

work

Check whether the

audio source supports

the A2DP protocol.

Audio source is

switched off

Switch on the audio

source.

Bluetooth is switched

off at the audio

source.

Switch on the Blue-

tooth function in the

audio source.

Bluetooth version is

not supported.

Use a different play-

back unit.

Sharp

whistling

sound during

microphone

operation.

Audio feedback Use the microphones

outside of the

speaker’s reverbera-

tion distance.

Battery cannot

be recharged.

The battery has

been discharged

completely.

Charge the battery

using the DC-12 V IN

input (18).

No sound in

all operating

modes.

Input level too low. Press and hold



but-

ton (8) to increase the

input level.

Technical Speciﬁcations

Model: .................................................................................BSS 4823

Power supply: ......................................................... AC 230 V, 50 Hz

................................................................ DC 12 V/5 A

Power Consumption:..............................................................100 W

Battery: ................................................................... 12 V 12000 mAh

Charging time: ............................................. approx.11hours.

Operating time: ................................................up to 36 hours.

Protection class: ................................................................................ II

Net weight: ................................................................. approx.17kg

Microphones

Voltage supply: ...............................................2x1.5VtypeAA/R6

Transmission frequency: ..................................636-865 MHz, UHF

Channels: ...........................................................................................2

Power: ...................................................................................... 50 mW

Bluetooth

Bluetooth support: ........................................................V2.1 + EDR

Range: ..................................................................approx.15metres

Transmission frequency: ......................................2.402-2.480 GHz

Protocols: ....................................................................A2DP/AVRCP

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG BSS 4823 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info