Bedienungsanleitung AEG BSS 4830 (Seite 31 von 54) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

654072

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

English

- USB port type A for music playback

- AUX input

- Micro-B USB charging port + indicator lamp for

recharging the battery

Scope of delivery

1x Bluetoothsoundsystem

1x Chargingcable(typeAUSBtomicroBUSB)

1x ACadapter(withtypeAUSBportforconnectingthe

charger cable)

1x Instructionmanual

First Use of the Device/Introduction

• Selectaproperplaceforthedevice.Adry,levelandslip

proof surface is suitable.

• Makesurethedeviceisventedsufciently!

• Removetheprotectivelmfromthedevice,ifpresent.

Charging the built-in Battery

Before you can use this device, you must charge the built-in

rechargeable battery. Charge the battery as follows:

1. Flip the rubberized cover (10) open.

2. Connect the charger cable to the micro B USB port

underneath the rubberized cover (10) and to the power

adapter. Plug the power adapter into a properly installed

wall socket. The indicator lamp lights up red and the bat-

tery charges.

3. When the battery has been charged completely, the

indicator lamp below the USB charger socket lights up

orange.

4. Unplug the power adapter from the mains and discon-

nect the charger cable from the device.

5. Then close the rubberized cover again.

CAUTION:

Never leave the unit unattended when it is charging.

NOTE:

• Thechargingtimevariesaccordingtobatteryuse.

• Ifthedeviceisoutofuseforalongperiodoftime,

charge the battery at least once every 6 to 12 weeks.

The battery will also constantly discharge when

switched off.

• Whenthebatteryisalmostempty,awarningsignal

sounds at intervals.

General Operation

Turning the device on/ off (5)

• Turnonthedevicebykeepingthe

button pressed. The

device starts in BT mode.

• Inordertoturnoffthedevice,pressandholdthe but-

ton again.

Volume

Press and hold the

/ button (6) or the / but-

ton (8) in order to adjust the volume as desired.

Sound Settings

If necessary, change the EQ setting in your playback unit to

create the best sound.

Playing back music ﬁles

There are three ways of playing your own music ﬁles with the

unit: via cable connection, wireless via Bluetooth, or via USB

port.

By cable (Cable not included)

1. Flip the rubberized cover (10) open.

2. Connectthe3.5mmstereoRCAcabletoanexternal

audio source. If required, use a suitable adapter (not

included).

3. Insert the other end of the cable into the AUX-IN jack on

the unit.

4. Press the MODE button (9) repeatedly until the AUX

indicator lamp (2) lights up.

5. Start the playback of your audio source. Listen to the

sound playback via the speaker.

6. For the further procedure, please refer to the user manual

oftheexternalaudiosource.

Keep the rubberized cover closed when not in use.

NOTE:

Ifpossible,adjustthevolumeoftheexternalunittoacom-

fortable level.

Cordless via Bluetooth

Bluetooth involves a technology for wireless radio connec-

tion of devices over a short distance. Devices with Bluetooth

standard are transmitting between 2.402 and 2.480 GHz in

the ISM band (Industrial, Scientiﬁc and Medical). Interference

canbecausedforexamplebyWLAN-networks,DABradios,

cordless phones, or microwave ovens which work on the

same frequency band.

This device offers you the possibility to use a Bluetooth-

enableddevice.Thefunctionalradiusislimitedtoapprox.

15 metres depending on the surroundings and the unit used.

If your playing device supports the A2DP proﬁle (Advanced

Audio Distribution Proﬁle) and has a music-player function,

then you can also wirelessly transfer music to the device. The

A2DP proﬁle involves a multi-vendor Bluetooth proﬁle. By

streaming, stereo-audio signals are wirelessly transferred be-

tween the playing device (source) and the receiving device.

To be able to remotely control the source, the playback de-

vice must support the AVRCP proﬁle (Audio Video Remote

Control Proﬁle).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG BSS 4830 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info