Bedienungsanleitung AEG BSS 4833 (Seite 31 von 58) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

654073

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

English

3. When the battery has been fully charged, the CHARGE

indicator lamp (6) turns off.

4. Disconnect the charging cable from the speaker and PC.

5. Then close the rubberized cover again.

CAUTION:

Never leave the unit unattended when it is charging.

NOTE:

• TherechargeablebatterycanonlybechargedifthePC

is switched on.

• Donotconnectthedevicetoalaptopfortoolong,if

latter one is not connected to the mains power. Other-

wise your laptop might discharge.

• Alternatively,chargethebatteryusinga5VUSBmains

adapter (not included).

• Thechargingtimevariesaccordingtobatteryuse.

• Ifthedeviceisoutofuseforalongperiodoftime,

charge the battery at least once every 6 to 12 weeks.

The battery will also constantly discharge when

switched off.

• Whenthebatteryisalmostempty,awarningsignal

sounds at intervals.

General Operation

NOTE:

The buttons on the devices are touch controls. Lightly

touchthemwithangerinordertoexecuteafunction.

Turning the device on/off (9)

Switching on: Set the switch on the rear side to ON.

Switching off: Set the switch on the rear side to OFF.

NOTE:

Afterapprox.30minuteswithoutasignalthedeviceswill

automatically turn to standby mode. In order to use the

devices again, turn them off and on again using the switch.

Volume

Use the VOL+/VOL– buttons (5/4) to adjust the volume ac

cordingly.

NOTE:

Asignalsounds,oncethemaximumorminimumvolume

has been reached. If necessary, increase the volume on the

externalaudiosource.

Sound Settings

If necessary, change the EQ setting in your playback unit to

create the best sound.

Simultaneous operation of both speakers

(paired mode)

NOTE:

Make sure no cable is connected to the LINE IN socket.

Bluetooth will be deactivated automatically, if an audio

cable is being connected.

Connecting both speakers

The Bluetooth mode allows you to play music via both speak

ers simultaneously. That requires both speakers to be paired

ﬁrst.

1. Switch on both speakers. Both speakers emit a signal

sound and the indicator lamps (11) start ﬂashing.

2. Simultaneously press the

button (2) on one device and

the button (1) on the other device. Both speakers start

pairing.

NOTE:

• Thespeakeronwhichyouhavepressedthe but-

ton will become the “Master” device.

• Ifbothspeakershadbeenpairedpreviously,the

connection will be automatically established after

approx.4seconds.

3. Both speakers emit a bell sound, indicating that both

devices have been paired successfully.

4. The BT/LINE indicator lamp indicates the “Master” and

the “Slave” respectively.

• Flashes=Master(leftchannel)

• Ligthsupsteadily=Slave(rightchannel)

5. Thenconnectyourexternalaudioappliancetoboth

devices. Follow the instructions as provided in chapter

“Playing back music ﬁles”

“Cordless via Bluetooth”.

NOTE:

In paired mode, the control buttons of both speakers will

work simulteneously.

Changing “Master” and “Slave” assignment

As long as no audio appliance is connected to the speakers,

you can change the speaker assignments.

1. Press and hold the

button on the current “Slave” and

simultaneously press the

button on the “Master”.

2. The speakers emit a sound. The BT/LINE indicator lamps

ﬂash two times every 2 seconds.

3. The assignment of the speakers will be changed. Both

devices emit a bell sound.

4. A conﬁrmation sound indicates that the new assignment

has been successful. The BT/LINE indicator lamp on the

new “Master” starts ﬂashing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG BSS 4833 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info