Bedienungsanleitung AEG CB7-1-8MTM (Seite 6 von 52) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

775139

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

6www.aeg.com

ENGLISH

Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and

spare parts. They have been designed especially for your product. This product is designed with the environment in

mind. All plastic parts are marked for recycling purposes.

COMPONENTS

A. Blender base

B. Suction feet

C. ON/OFF-button

D. Mini jug

E. Blender blade

F. Blender blade base

G. Mini jug lid with ller hole

H. Measuring cup

I. Take away bottle*

J. Spill-proof drinking lid with carry handle*

K. Cooling stick*

L. Multi-chopper jar*

M. Multi-chopper blade*

N. Multi-chopper blade base*

O. Ice Crush function

P. Smoothie function

Q. Pulse function

*Certain models only

Picture page 2-4

GETTING STARTED

1 Before using your appliance for the rst time: Remove all packing material such as plastics, stickers or tags that

may be attached to the blender base, bowls or attachments.

Clean the appliance and accessories, see instructions: “Cleaning and Care”.

2 Prepare the ingredients: Rinse ingredients thoroughly. Cut the ingredients into 4 to 6 pieces and remove any hard or

large seeds. Remove any thick peel from the fruit or vegetables.

3 Place the Blender blade (E) on the top of the Blender blade base (F), and tighten the Mini jug (D) until it rmly locks

into position. Place the assembled jug on the Blender base (A) and rotate it clockwise until it locks into position. (The

jug can only be placed in one position). When locked, the symbol on the jar should be aligned with the symbol

on the blender base. Put the ingredients in the jug. (Do not exceed the maximum level as indicated on the jug.)

Caution! Always place the sealing ring around the Blender blade. Use only sealing rings provided by AEG!

4 Close the lid by aligning the lever on the lid with the handle of the jug. Insert the measuring cup.

(You can add ingredients through the ller hole. Never remove the measuring cup or the lid while running the

product.)

Caution! Never run the blender empty. When processing hot liquids, see step 5.

5 Processing hot liquids: We recommend to allow hot liquids to cool down (max 90 °C) before lling the jug.

Fill the jug only half full and start processing on low speed. The blender jug can become very warm – take care to

protect your hands and to ventilate steam out through the ller hole. Always replace the lid before use.

6 Start the blender: Plug into mains. Press the ON/OFF-button (C), the buttons will light up. Press the 1 (Low) or 2

(High) button, to select your desired processing speed.

7 Caution! Keep hands and utensils out of the blending jug while blending.

Caution! Never run the blender empty, running the blender empty can cause overheating and damage the product.

8 You have preset speeds (1, 2), dedicated recipe programs, and Pulse mode to choose from. The selected speed or

recipe program will light up. The blender will operate until the program is nished. To stop any program manually,

press any button.

9 With Pulse you can give the ingredients a quick mix to get to your desired consistency. Press the Pulse button

(Q) to go into Pulse mode. The Pulse and the speed buttons start blinking. Press 1 (Low) or 2 (high) to pulse at dif-

ferent speeds.

10 The product comes with a variety of recipe programs. You can choose between Ice crush (O) and Smoothies (P). The

blender will stop automatically when the program is ready.

USING THE TAKE AWAY BOTTLE* (* CERTAIN MODELS ONLY)

11 Fill the ingredients in the take away bottle (I). Place the blender blade (E) on the open end of the jar and tighten

the blender blade base (F) by screwing it on the jar. Turn the take away bottle upside down. Push down the assem-

bled take away bottle onto the blender base (A) and rotate it clockwise to lock until it clicks into position. Note: When

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG CB7-1-8MTM Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info