Bedienungsanleitung AEG CSFMP300 (Seite 38 von 48) (Deutsch)

28803

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

OPERATION

d) MASK DPI or MASK ALL mode

The AF frequency (which has different

PI or NO RDS signal with high field

strength) is masked during checking

PI when the unit searches AF. The

unit doesn't search this AF (DIP) for

few minutes. In the case of the AF of

NO RDS signal with high field strength,

if the real AF is wrongly masked as

DIP by some interference, the unit

hesitates to search real Afs.

For this reason, the unit has the user

option (MASK DPI) which doesn't

mask the AF of NO RDS signal with

high field strength. In MASK DPI

mode, the wrong sound or long mute

(according to PI SOUND or PI MUTE)

can be heard from the AF station

which has NO RDS signal and of

which the field strength is higher than

that of the currently tuning AF (station).

But, these phenomenons are rare and

the user will hardly hear the wrong

sound in whole Europe.

- MASK DPI mode:

Masked only the AF which has

different PI.

- MASK ALL mode:

Masked the AF which has different

PI and NO RDS signal with high

field strength.

e) BEEP 2'ND, BEEP ALL, BEEP

OFF mode

The situation of beep sound is

selected. The 3 mode is selected a

also rotating VOLUSE knob (11)

clockwise or counter-clockwise.

- BEEP 2'nd mode:

The beep is only generated when

all allowed double key is pressed

long (1 sec).

e.g.

When preset button (14) is pressed.

When BND/LOU button (13) is

pressed.

When AS/PS button (18) is pressed.

- BEEP ALL mode:

The beep is generated when every

key is pressed.

- BEEP OFF mode:

The beep is disabled.

LOUDNESS

Press BND /LOU button (13) for several

seconds to reinforce the bass output.

Press it for several seconds again to

release this function.

DISPLAY

Press DSP button (15) to operate as the

conversion of each display mode as

follows:

- In case of receiving a RDS station

In radio mode:

->PS ->CT ->FREQ ->PTY ->

In CD mode:

->CD ->CT ->PS ->FREQ ->PTY ->

- In case of no receiving CT or PTY

information, the display shows as "NO

CLOCK" or "NO PTY".

- In case of receiving a non RDS station

In radio mode:

->"NO CLOCK" ->FREQ -> "NO PTY" ->

In CD mode:

-> CD -> CT -> FREQ -> "NO PTY" ->

Each displaying time is several seconds,

and come back to 1 position after

several seconds.

Notes:

- CT = clock time

- FREQ = frequency

c) RETUNE L or RETUNE S mode

The initial time of automatic TA search

or PI search modes is selected.

When PI information is not caught for

retune time, the radio starts to retune

to next same PI station.

When same PI station does not catch

1 cyclic search, the radio goes to last

station and waits for several minutes

until PI code is received.

- RETUNE L mode:

Selected as 90 seconds.

- RETUNE S mode:

Selected as 30 seconds.

EQUALIZATION

Press EQ button (12) to turn on

equalization function and to select

desired audio mode. There are five

kinds of mode as below:

FLAT CLASSICS POP M ROCK M DSP OFF

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG CSFMP300 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info