70
ENGLISH
15.2 Language Settings
1. Press the MENU button to display the OSD main menu.
2. Press the arrow button
until OPTION is activated.
3. Press the arrow button to highlight the item:
-
Language:
Press the arrow buttons / to select the OSD
language.
-
Audio Language:
Press ENTER and press the arrow buttons to
select the audio language.
-
Subtitle Language:
Press ENTER and press the arrow buttons
to select the subtitle language.
4. Press EXIT to exit the menu and save the changes.
NOTE:
The functions Audio Language and Subtitle Language are only valid if the broadcaster transmits subtitles or a second
soundtrack (with a dierent language).
15.3 Default
With reset to default settings all user-dened settings are deleted. Your personal password is not deleted.
1. Press the MENU button to display the OSD main menu.
2. Press the arrow button
until OPTION is activated.
3. Press the arrow button
to highlight Restore Setting and press ENTER.
4. Press
to highlight Yes and press ENTER.
16. Troubleshooting
Before contacting customer support try to solve the problem with the tips from the following table:
Problem Possible cause and proposal for solution
No image, status LED not on
• Check if the main switch at bottom right of the device is set to ON.
• Check if the mains plug sits properly in the wall outlet.
• Check mains power on the wall outlet with a dierent device or connect TV set to
dierent wall outlet.
• Check if the signal cables from source devices are properly connected.
• Check if the source device is turned on.
Image ickers
• Check if the input signal of the source device matches the specications of the TV set.
• Check if the PC menu settings match the video output settings of the PC.
• Set the values again.
TV set cannot be turned on.
• Check if the mains plug sits properly in the wall outlet.
• Check if the main switch at bottom right of the device is set to ON.
No sound.
• Check if the audio cables are properly connected.
• Check the volume.
• Check if the earphones are connected.
Volume too low.
• Check the volume.
• Set the volume.
• Check if the volume is limited in the hotel mode menu.
Snowy image. • Check if antenna or antenna cable are damaged.
