Bedienungsanleitung AEG CTV 4818 (Seite 48 von 58) (Deutsch, Englisch)

551837

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

ENGLISH - 47 -

Programme table is also entered directly by

pressing 

 button.

 Program table may be entered only when

the layout is full screen. You can not enter to

program table when layout is pip or split

screen.

Moving cursor to four direction you can reach

30 programmes in the same page. By

scrolling the pages up or down by pressing

the navigation buttons you can select all the

programmes in TV mode (except the AV

mode).

In program table, 

 /   buttons work like

"Direction Up" and "Direction Down". By cur-

sor action, programme selection is done au-

tomatically.

Programme Number is between 01 and 99.

00 is not displayed on program table.

Programme Name has a name string with 5

characters. After autoset process the

Programme Names are set to "C02" or

"S07" (channel type and channel number)

or name of the tuned channel if defined.

At the bottom of the program table there is a

programme sort functions section. Each

function is activated by color button (seen

above). By Delete you can delete

programmes that you decided. Insert sec-

tion is for inserting programmes into an-

other programme spaces. Name allows

changing the programme name.

Delete:

For "Delete" process RED button is

pressed. The following warning menu

comes to screen. Pressing M button can-

cels the activated "Delete" process. Press-

ing OK button erases the selected

programme from the programme list, and

the programmes below shift one up.

0! 2.!

Insert:

Select the program which you want to insert

by navigation buttons. Press GREEN button.

By navigation buttons move the selected

program to the decided programme space

and press GREEN button again.

Name:

To change the name of a decided

programme, that programme is selected

and pressed to the YELLOW button. The fol-

lowing menu comes to screen.

The first letter of the selected name is high-

lighted. To change that letter   /   button

can be used, and to select the other letters,

  /   button can be used. If the cursor is

at the last letter of the Programme Name,

pressing   button moves the cursor at the

beginning. On the contrary, if the cursor is at

the beginning of the Programme Name,

pressing 

 button moves the cursor at the

end.

country

By pressing 

 /   button, select country.

"right/left to change country" is seen on

the screen. By pressing 

 /   button, you

should select the country where you are.

autoset

By pressing 

 /   button, select autoset.

"right/left to start aps function" is seen on

the screen. When   /   or OK button is

pressed, the following menu comes to the

screen. If you want to cancel autoset func-

02-ENG-2707W-1546 UK-27 INCH TFT-(CHI MEI)(10 PAGE)-50055817.p65 03.08.2004, 17:0147

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG CTV 4818 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info