Bedienungsanleitung AEG CTV 699 (Seite 28 von 44) (Deutsch, Englisch)

551876

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

ENGLISH

c) In AV mode

With this button you can call up the analogue

settings menu (brightness, contrast etc.). (The

default menu language is English and cannot be

changed.)

• EXIT

With this button you can return to the previous menu,

exit from the menu or return from OSD displays (e.g.

teletext) to the television channel.

• ̆ CH+ / ̄ CH- (Channel Selection)

With the ̆ CH+ button you can select the next

channel.

With the ̄ CH- button you can select the previous

channel.

If the menu is on the screen these buttons are used

for navigating within the menu.

• ̈ VOL+ / ̇ VOL- (Volume Control)

With ̈ VOL+ you can turn up the volume of the

television set.

With ̇ VOL- you can turn down the volume of the

television set.

• OK (Conﬁ rmation)

• MUTE

With this button the sound is switched on and off,

or press the ̈ VOL+ / ̇ VOL- buttons to turn the

volume back on.

• AUDIO

With this button the menu window for the audio chan-

nel is displayed in order that you can adjust the sound

mode (LR, LL or RR). Press the button again to return

to the television channel.

• 0, 1, 2, 3, …, 0

With these buttons you can enter a channel number

directly or enter data (e.g. teletext pages).

• PAUSE (only in DVB Mode)

With this button you can stop the picture (still frame).

The sound is switched off. Press this button again to

cancel the function.

• TV/RADIO

With this button you can switch between the AV and

television (TV) operating modes.

• SLEEP (Automatic Switch-off Time)

With this button you can select the automatic switch-

off time in steps of 30, 60, 90, 120 minutes and OFF.

• P/N (Video Output Signal)

With this button you can switch the colour system

of the video output signal between PAL, NTSC and

AUTO.

•

Alternating Button

With this button you can alternate between the current

and the previously selected channel.

• TV/AV

With this button you can alternate between the VGA,

AV and DVB inputs.

• + / -

With these buttons you can adjust the analogue

values of BRIGHTNESS, CONTRAST, COLOR, VO-

LUME and TINT. In order to set the individual values

press the MODE button beforehand. Note: TINT can

only be adjusted in the NTSC system.

• MODE

a) In DVB mode

Each time this button is pressed the analogue

values are called up, which you can then adjust

with the + / - buttons.

b) In VGA / AV mode

No function. In order to set the picture values

please use the MENU button.

5. Basic Operation

Basic Interface Connexion

5.1 Connexion to the Mains

with the Alternating Current Adapter

Connect the electric plug of the alternating current

adapter to the socket marked „DC +12V“ on the set

and then insert the mains plug of the alternating

current adapter into a properly installed 230 V/50 Hz

wall socket.

Cautions:

• The included AC power supply cord and AC adap-

tor are for use with this unit only. Do not use them

with other equipment.

• When the unit ist not going tobe used for a long

time, disconnect the AC power supply cord from

the AV outlet.

5.2 Connexion using the Adapter

for the Vehicle Cigarette Lighter

The 12 V cigarette lighter adapter is used for motor

vehicles that have a 12 V power supply with negative

earth.

Cautions:

• Use this unit only with the included 12 V car plug

adaptor, use with other car adaptor could damage

the unit.

• The included 12 V car plug adaptor are for use

with this unit only. Do not use them with other

equipment.

• Tampering with the set while driving a motor

vehicle is forbidden. (See safety instructions.)

• Make sure the unit is fastened correctly to prevent

from falling in the vehicle in the event of an acci-

dent.

• When the inside of the cigarette lighter socket

is dirty with ashes or dust, the plug section may

become hot due to poor contact. Be sure to clean

the cigarette lighter socket before use.

• After use, disconnect the 12 V car plug adaptor

from both the unit and cigarette lighter socket.

05-CTV 699 LCD_GB 28 02.09.2005, 11:50:01 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG CTV 699 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info