Bedienungsanleitung AEG CX7-2-35WR (Seite 5 von 30) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

697501

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

ENGLISH

Thank you for choosing an AEG CX7 vacuum cleaner. In order to ensure the

best results, always use original AEG accessories and spare parts. They have

been designed especially for your vacuum cleaner. This product is designed

with the environment in mind. All plastic parts are marked for recycling

purposes.

DESCRIPTION OF CX7

A. ON/OFF button

B. Power regulation button

C. ON/OFF button, hand unit

D. Locking screw

E. Release button, hand unit

F. Charging station, wall unit

G. Charging station, oor unit

H. Charging adapter

I. Fine lter (inner lter)

J. Pre lter (outer lter)

K. Release button, dust container

L. Dust container

M. Dusting brush

N. Crevice nozzle

O. Cable protector grill

P. Hatch cover for brush roll

Q. Brush roll

R. BRUSHROLLCLEAN® pedal*

S. Nozzle front lights

T. Charging indicator

U. Cli hanger

V. Slot for accessory storage

* Not on models CX7-2-30xxx

BEFORE STARTING

Check that the package includes all parts described in this instruction

manual and read this manual carefully. Pay special attention to the safety

precautions chapter. Save these instructions.

1 Assemble the handle.

2 Assemble the charge stand.

3 There is a hollow space in the bottom of the charging station where

unused cable can be wound. Insert the adaptor into the mains and

position the charging station on a stable and horizontal surface away

from heat sources, direct sunlight or wet places.

4 The charging indicator will be lit when CX7 is placed in the charging

station.

CHARGING CX7

5 When fully charged, the charging indicator will blink slowly. The

numbers of LED lamps will indicate the level of charge.

Full charging

time is around 4hours. For better battery performance, charge CX7 for

24hours before rst use and always keep it on charge when not used.

VACUUMING WITH CX7

Before vacuuming, check that the nozzle wheels and the brush roll are

clean from sharp objects in order to avoid scratching sensitive oors

and to ensure full cleaning performance.

6 Start and stop CX7 by pushing the ON/OFF button.

CX7 will start on the high power mode.

For more silent cleaning and longer runtime, press the power regula-

tion button.

VACUUMING FURNITURE, CAR SEATS ETC.

7 Press the button to release the hand unit from the main body.

8 Attach the crevice nozzle to facilitate cleaning of areas dicult to reach.

Attach the brush on the crevice nozzle for dusting.

9 The crevice nozzle and small brush can be stored in the charging sta-

tion or in the slot on the back side of the handle.

BRUSHROLLCLEAN® FUNCTION (CERTAIN MODELS ONLY)

Use the BRUSHROLLCLEAN® function to keep the brush roll clean and

free from hair and bres. For best results use the BRUSHROLLCLEAN®

function when CX7 is fully charged.

10 Place CX7 on a hard and at surface. Do not use the BRUSHROLLCLEAN

function on carpets.

Press the BRUSHROLLCLEAN

pedal with your foot while the cleaner is

on. Hold for 5 seconds until hairs and bres are removed. There will be

a cutting noise during this process, this is normal. If hairs remain on the

brush roll, repeat the process.

The BRUSHROLLCLEAN

function is equipped with an overheating

protection. If the BRUSHROLLCLEAN

function has been used for more

than 30 seconds (constant or interrupted) it will deactivate the brush

roll and turn o the nozzle front lights. The vacuum cleaner can still

be used, even when the BRUSHROLLCLEAN

function is deactivated.

Toreactivate the BRUSHROLLCLEAN

function, place CX7 on charge

and charge for 15minutes.

Please note that the BRUSHROLLCLEAN® function might not be able to

remove thicker threads or wires that are caught in the brush roll.

EMPTYING OF THE DUST CONTAINER

11 Remove the dust container by pressing the buttons.

12 Take out the lters from the dust container by pressing the release but-

tons.

Empty the contents into a dustbin. Never wash the dust container

or lters in a dishwasher.

IMPORTANT  FILTER CLEANING!

13 The lters must be cleaned at regular intervals to ensure a high clean-

ing performance.

Take out the lters by pressing the release buttons.

Separate the inner lter from the outer lter.

14 Rinse the lter parts carefully under lukewarm water without using any

detergents. (Never use the dishwasher or washing machine.) S

hake to

remove excess water and leave to dry minimum 12h before putting

them back into the cleaner.

CLEANING THE HOSE AND NOZZLE WHEELS

15 Loosen the hose behind the nozzle from its upper connection. Remove

any object or debris that can be blocking the airow in the hose or in

the air channel to the dust cup, and put the hose back.

16 If the wheels need to be cleaned or get jammed, remove them carefully

by using a at screwdriver.

REMOVING AND CLEANING THE BRUSH ROLL

17 If the brushroll gets blocked CX7 will stop. Open the cable protector

grill and the brush roll hatch cover and remove the brush roll.

18 Us

e a pair of scissors to remove threads etc. Reassemble the brush roll,

making sure it can spin freely.

REMOVING THE BATTERIES FOR RECYCLING

Warning; Battery removal must only be done by an AEG service

center or ocial collection point!

19 Only remove batteries if the product is to be scrapped. Improper han-

dling of the batteries may be hazardous. Batteries should always be

completely discharged before removal.

Take your product to an AEG

service center or ocial collection point for recycling. They can remove

and recycle the battery and electric parts in a safe and professional way.

Follow your country’s rules for collection of rechargeable batteries and

electrical products.

Enjoy a great cleaning experience with CX7!

7www.aeg.com

AEG CX7-2-35WR Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info