Bedienungsanleitung AEG DAB plus MC 4469 (Seite 25 von 32) (Deutsch, Englisch)

673555

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

NOTE:

• If the connection is lost, follow the above instructions

to pair your device again to the appliance.

Listen to music from Bluetooth device

• If the connected Bluetooth device supports Advanced

Audio Distribution Proﬁ le (A2DP), you can listen to music

stored on the device through this appliance.

• If the device also supports Audio Video Remote Control

Proﬁ le (AVRCP), you can use the remote control of the

appliance to play music stored on the device.

1. Pair your device with this appliance.

2. Play music via your device (if it supports A2DP).

3. Use supplied remote control to control playback (if it

supports AVRCP).

- To pause / resume playback, press the

button.

- To skip to a track, press the

buttons.

AUDIO IN / AUX Operation

1. Press the AUDIO button on the remote control or press

the button on the appliance to select the AUDIO

mode. Pressing the button twice activates the AUX

mode.

2. Operate your audio device directly for playback features.

3. Press the VOL +/– button to adjust the volume to your

desired level.

DAB Operation

DAB radio mode receives DAB / DAB+ digital radio and

displays information about the station and the program /

track as broadcast.

1. Scanning for Stations

The ﬁ rst time you use the appliance, or if the station list is

empty, the radio automatically performs a full scan to see

what stations are available. You may also need to start a scan

manually to update the list of stations for one of the following

reasons:

• New stations may become available from time to time.

• Stations close or can no longer be received (In the station

list, invalid stations are indicated with a question mark in

front of their name).

• If reception was not good after the original scan (for

example the antenna was not up), this may result in an

empty or incomplete list of available stations.

• If you have poor reception of some stations causing the

audio to break up, you may wish to list only stations with

good signal strength.

Full Scan

Select MENU > Full scan

Once a scan is complete, the radio returns to playing the

previously selected station or ﬁ rst station on the station list.

Removing of stations that are listed but not available

Select MENU > Prune

This removes all invalid stations, indicated in the station list

with a “?” in front of the station name.

2. Selecting Stations

Changing a station

Use the

button to scroll through the Station List

and press the

button to change a station.

The Now playing screen is displayed with the new station

details.

Some stations are secondary services associated with a Pri-

mary channel and only available at certain times. Any station

that has associated secondary services is indicated with a

double chevron pointing to the right. The secondary service

station stations are always listed next to their primary station

rather than the normal is indicated with a double chevron

pointing left. In the Station List is secondary alphabetical

order.

3. Presets

The appliance has 40 preset memory locations for DAB.

Storing a station in a preset memory location

Press and hold the PROGRAM button about 3~5 seconds

until the display shows Preset # Stored. Presets (1-40) are

displayed as either Empty or with the currently stored station

name.

Use the

button to choose a preset memory then

press the

button to store the currently playing station.

After conﬁ rming the preset station is stored, the display

reverts to the Now playing screen.

Recalling a Preset Station

Press the PROGRAM button brieﬂ y (the display will show

Preset Recall). Select one of the listed preset stations using

the

button and press the

button to choose the

displayed preset station.

4. Manual Tune

As well as the normal method of scanning, you can also

manually tune to a particular channel / frequency. This can be

useful for adjusting your antenna to achieve the best possible

reception and scanning a particular channel to update the

station list.

Manual Tuning

Press MENU > Manual tune then use the

button to

display a particular channel / frequency and press the

but-

ton to tune to that channel / frequency. The display shows a

live indication of the received signal strength on the selected

frequency. Adjustments to your antenna will be manifested in

the received signal strength displayed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG DAB plus MC 4469 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info