Bedienungsanleitung AEG DB1150 (Seite 13 von 48) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch)

561377

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

You will obtain optimal steaming

results and the noise produced by the

steaming will be steadier after the

water reservoir has been filled and

drained three times.

Ironing with Steam

To steam iron, set the temperature

selector (Figure 1/N) to the required

fabric type and wait until the power

indicator (Figure 1/J) goes out - only

then set the steam selector (Figure 1/F)

to the desired position (Figure 4/B). You

will find which temperature setting

(fabric type) matches which steam set-

ting in the ironing table. As soon as the

steam iron is held horizontally steam

begins to form. When the steam iron is

set upright again the steam supply

stops automatically.

Spray Function (Figure 6/A)

The first time you use the appliance,

or if you have not used it for a long

time, you will need to press the spray

function button (Figure 1/H) several

times before water comes out of the

spray nozzle (Figure 1/D). You can also

use the spray function when dry iron-

ing.

Super Steam Jet Function

(Figure 6/B)

The super steam jet function is of

valuable assistance when ironing, for

example, creases, embroidery etc. You

can trigger the additional steam jet

both when steam ironing and when dry

ironing.

0 Set the temperature selector

(Figure 1/N) to the “MAX” position and

wait until the correct temperature has

been reached, i.e., until the power indi-

cator (Figure 1/J) goes out.

0 Raise the steam iron a little away from

the material and press the steam jet

button (Figure 1/G).

Always wait another 5 seconds before

pressing the steam jet button again.

Steaming hanging items of

clothing

0 Turn the temperature selector

(Figure 1/N) to the “MAX” position

and wait until the power indicator

(Figure 1/J) goes out.

0 Hang the article concerned on a

hanger and hold the steam iron at

a distance of 10 – 20 cm from the

material.

0 Now press the steam jet button

(Figure 1/G). Wait at least 5 seconds

before pressing the button again.

Warning: Do not attempt to freshen

up clothing whilst it is still being worn.

Risk of burning!

Drip Stop

The steam iron has an automatic drip

stop function. The drip stop immedi-

ately interrupts the creation of steam

if the temperature selected is too low.

Storage

Remove the plug from the socket!

Set the temperature selector

(Figure 1/N) to the “Cold” position

(Figure 2/a) and the steam selector

(Figure 1/F) to position

„“ (Figure

„“4/A).

Empty out remaining water (Figure 7).

Store the appliance standing upright.

To store properly wrap the mains cord

around the cord storage (Figures 1/M

and 8).

Care and Maintenance

The steam iron has an automatic decal-

cification feature, which significant

slows down the deposit of limescale in

the steam chamber.

The steam iron must not be des-

caled! Neither vinegar nor proprie-

tary brands of descaler must be

filled into the water reservoir!

822 949 340 DB_1100.book Seite 13 Montag, 28. April 2008 11:51 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG DB1150 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info