Bedienungsanleitung AEG DBS7135 CompactPower (Seite 27 von 28) (Deutsch, Englisch, Holländisch, Französisch)

640821

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Problem Possible cause Solution

Soleplate is not heating even though

iron is turned on.

Connection problem Check main power supply cable, plug

and outlet.

Temperature control is in MIN position. Select adequate temperature.

Iron does not produce steam. Not enough water in tank. Fill water tank (see “Getting started”,

no 2).

Steam control is selected in non-steam

position (‘MIN’).

Set steam control between positions of

minimum steam and maximum steam.

Selected temperature is lower than that

speciﬁed to use with steam.

Increase temperature to at least

Steam jet and vertical steam jet

function does not work.

Steam jet function was used very

frequently within a short period.

Put iron on horizontal position and

wait before using steam jet function.

Iron is not hot enough. Adjust the proper temperature to

steam ironing (up to

). Put iron

in vertical position and wait until

temperature indicator light turns o.

Water leaks from the soleplate during

ironing.

The iron is not hot enough. Set the temperature dial to a

temperature

(

to maximum) suitable for steam

ironing. Put the iron on its heel and

wait until the light has gone out before

you start ironing.

Flakes and impurities come out of the

soleplate during ironing.

You have used hard water, which has

caused scale akes to develop in the

water tank.

Press and hold the steam button for

about one minute to get steam. Then

hold one more minute in order to

clean the steam generating system.

Iron an old towel, to ensure that

any residues inside the iron are not

transferred to the laundry.

Water leaks from the soleplate while

the iron is cooling down or after it has

been stored.

The iron has been put in horizontal

position while there is still water in the

water tank.

Empty the water tank and set the

steam control to position o before

storing the iron.

Brown streaks come out of the

soleplate while ironing and stain the

linen.

You have used chemical descaling

agents.

Do not use any descaling agents.

Fabric bres have accumulated in the

holes of the soleplate and are burning.

Clean the soleplate with a damp soft

cloth.

Fabrics might not be properly rinsed or

the garments are new and have not been

washed before ironing.

Please rinse the laundry properly

again.

Troubleshooting

Disposal

Recycle the materials with the symbol

. Put the packaging in applicable

containers to recycle it.

Help protect the environment and human

health and to recycle waste of electrical

and electronic appliances.

Do not dispose appliances marked with

the symbol

with the household

waste. Return the product to your

local recycling facility or contact your

municipal oce.

DBS7135_Safirina_SteamStation_BASE_AEG.indd 27 2015-05-25 10:18:25

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG DBS7135 CompactPower Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info