Bedienungsanleitung AEG DDLE OKO TD 21 (Seite 24 von 100) (Deutsch, Englisch)

648348

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Operation – for users and qualied contractors

3. Equipment description

The appliance heats water as it ows through it. The

DHW outlet temperature can be innitely adjusted at

the temperature selector. From a certain throughput, the

control unit regulates the correct heating output, subject to

the temperature selected and the cold water temperature.

The throughput is automatically reduced by the ow

regulator valve when supply temperatures are low and

the selected outlet temperature is high. This ensures

that the required temperature can be achieved reliably.

An ERROR is displayed if the appliance is operated with

preheated water above 45 °C.

Temperature selector

You can innitely adjust the required temperature by

turning the rotary selector. The adjusted temperature is

shown on the display. The available temperature range

is specied in the chapter “Specication”.

Memory keys 1 and 2

These keys enable you to quickly select two different

temperatures. You can determine these temperatures.

ECO key

This key enables you to switch the ECO function ON and

OFF. Switching the ECO function ON illuminates a green

LED below the key. In addition the ECO symbol appears

on the display.

The ECO function limits the flow rate to the ECO

throughput and sets the preselected ECO temperature.

You can match both values via this key.

Note

Any temperature adjustment on the appliance (with

temperature selector or via the memory keys) results

in the ECO function being cancelled. If required you

may then have to restart the ECO function.

If the temperature is selected via the wireless remote

control, the ECO function will also be restarted

automatically after the draw-off event has been completed.

INFO menu

You reach the INFO menu by pressing the ECO key,

where you can set comfort functions individually and/or

scan values (see chapter “Selecting ECO”): The ECO key

also enables you to determine the display brightness and

the orientation light.

You call up the setting options by holding down the ECO

key longer than three seconds.

If you now keep pressing the ECO key, you will reach the

respectively next function.

Once you have called up the required function, make your

function adjustments by turning the rotary temperature

selector.

Remote control via wireless remote control

With the wireless remote control you can inuence the

appliance temperature from a distance (for example from

the kitchen sink).

The wireless remote control features four keys (38 °C

and 55 °C permanently set; + and - adjustable in steps

of 0.5 °C) for temperature selection. The transmission of

signals to the appliance is indicated by the red LED on

the wireless remote control illuminating. The transmitter is

waterproof and can be used whilst showering or bathing.

With the appliance in ECO mode, the ECO function is

suspended for the next draw-off event if a key on the

wireless remote control is pressed. Two minutes after

drawing has ceased, the appliance is reset to ECO mode.

In standard mode, a constant temperature setting can

be achieved via the wireless remote control (see chapter

“Wireless remote control key”).

Dynamic anti-scalding protection

The appliance is equipped with dynamic scalding

protection. The user that selects a temperature rst, either

at the appliance or at the remote control, determines the

temperature for the next draw-off event. No other user

can increase the temperature above 43 °C within the next

two minutes, during the draw-off event, or for two minutes

after the event.

Child-proof system

You can set the appliance to a maximum temperature (see

chapter “Start childproong”).

Wellness comfort function

You can permanently select the Wellness comfort

function, which reduces the temperature by 10 °C after

three minutes’ draw-off and raises it again 10 seconds

later. After a further 10 seconds, the temperature is

again reduced by 10 °C, and then raised after another

10 seconds (see chapter “Setting Wellness comfort

functions”). These temperature changes continue until

the draw-off event ends.

Automatic water volume control

You can select an automatic water volume control that

reduces the throughput to approx. 4 l/min after a specied

volume has been drawn off (see chapter “Setting automatic

water volume control”). That way you can inuence the

amount of water drawn as well as the duration of a shower.

The selected automatic water volume control applies only

to the next draw-off event.

Display backlighting

The appliance display is backlit. If you set temperatures

up to 42.5 °C, the backlighting illuminates in blue; at

temperatures from 43.0 °C, the colour of the display

changes to red.

The display backlighting is switched ON as soon as

you press any key, turn the rotary temperature selector,

or if water ows through the appliance with a greater

throughput than the start volume.

If no water is drawn off or the appliance is not operated for

30 seconds, the background lighting switches off (only if a

deactivated orientation light has been selected).

The brightness is dimmed if draw-off continues longer

than 15 minutes (Reduction only with the setting > 20 %).

You can adjust the brightness individually for red and blue

in ve stages (see chapter “INFO menu settings”).

Orientation light

The orientation light then lights up with the intensity of the

set background lighting.

AEG DDLE OKO TD 21 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info