Bedienungsanleitung AEG DKE 100 (Seite 30 von 64) (Deutsch, Englisch, Holländisch, Französisch)

648362

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

OPERATING INSTRUCTIONS

Using the product

Weekly consumption

This function makes it possible to view the power

the radiator has consumed over the previous 7 days.

If the consumption indication is ﬂashing, this means

that the data saved relates to a period of less than

7 days.

Please note: The display shows the estimated

consumption, which may differ from that measured

by speciﬁc meters, suitable for the purpose.

Displaying the ambient temperature

The display shows the ambient temperature measu-

red by the radiator.

Alignment of the ambient temperature

This function is used to edit the ambient temperature

measured by the radiator and used to manage hea-

ting power, if it needs to be corrected to compensate

for reading errors due to things like being near to

heat sources, or cold air draughts.

The display ﬂashes the correction value to be applied.

To edit it, push the “+” or “-“ keys.

If, for example, the temperature set on the radiator

is 19,2°C and the ambient temperature is measured

at 19,5°C, align it by +0,3°C.

Always wait at least 4 hours for the temperature to

settle, before doing any alignment.

Remote control

This function allows the radiator to be controlled

using external timers, piloted sockets with telephonic

control, and similar devices.

For further details see paragraph 6.3.3.

Switching the function (ON) or (OFF) is done by pus-

hing the “+” or “-“ keys respectively.

Warning: Activation is NOT indicated by any icon on

the display.

6.3.1 Presence sensor

This function allows the radiator to pick up whether or not people are in the space, and automatically regulate the heating level, in

order to optimise comfort and energy saving.

Thanks to this function, which can only be activated in Comfort mode, the radiator continuously monitors the room and, if no people

are detected, it reduces the comfort temperature set as follows:

Period of absence Reduction of the Comfort temperature Indication on the display

60min 1,0°C The presence sensor and comfort mode

symbols ﬂash together

90min 2,0°C

120min 3,5°C

38hours Anti-freeze activated 7±3°C

The reduction of temperature always relates to the comfort temperature. If the radiator is in Eco or Anti-freeze mode, no change in

temperature to be maintained in the room will be observed.

Should someone be detected in the room for at least 10 consecutive minutes, the temperature is automatically returned to the comfort

temperature set, without any reduction. The same happens if, while the temperature required is being reduced, due to an absence of

people being detected in the room, the „M“ key is pushed.

Important: Correct operation of this function may depend on where the radiator is positioned in the room. To choose the best installation

position, bear in mind that the sensor detects movements within the area indicated in ﬁgure 9, and that no objects must be in its way.

Presence detection is also more effective when people move in front of the sensor that when they move towards it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG DKE 100 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info