Bedienungsanleitung AEG dvd 4602 hc (Seite 22 von 36) (Deutsch, Englisch)

370819

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH

Note: If possible, use the S-video connection as this

guarantees the best signal quality. Do not forget to

switch the television set to the S-video input mode. The

component video connection also offers excellent signal

quality. If you use component video, the video output

signal has to be set to YUV. If the scart connection is

used, please select the setting RGB for the video output

signal (insofar as the television set supports this setting).

In RGB mode the picture is clearer and the colour repro-

duction more natural. Unfortunately we cannot provide

any general information on optimum connection as this

depends on the television set.

C. Connecting to a Stereo Radio

1. Connect the left and right audio channel (optional).

This unit is equipped with a stereo input (AUX IN) to

which audio sources can be connected (decoder,

audio processors, preampliﬁ ers). Connect the audio

output of the stereo radio to the AUX IN connection

of the unit.

2. Home Cinema System

3. Connect the cable to the left/right audio output of the

system (optional).

4. Connect the MW aerial.

5. Connect the FM aerial.

6. Connect the optical cable or the coaxial cable (optio-

nal).

7. AC power cord

Note:

• After the cable connections have been made the

audio output signal of the unit has to be adjusted

accordingly.

• The playback of DVDs with 5.1 sound requires

that you are using a 5.1 audio system and all six

loudspeakers are connected to the unit.

• DVDs recorded in PCM format (sampling rate 96 kHz)

can only be played back in stereo.

D: Connecting to a Decoder or Ampliﬁ er

When DVDs are being played back which were recorded

with Dolby Digital or MPEG audio format, the Dolby Bit-

stream or the MPEG audio stream are reproduced from

the player’s optical or coaxial output. If you connect the

player by means of an optical or coaxial cable to a Dolby

Digital decoder or an MPEG audio decoder you will enjoy

the same surround sound quality as in a real cinema.

Connection to an Optical Output

Take off the protective cap from the optical output and

connect the DVD player with an optical cable to the

optical input of the ampliﬁ er. Then check whether the

plugs are ﬁ xed ﬁ rmly in the sockets. Keep the protective

cap in a safe place. If the optical connection is not being

used the protective cap should be put back in position

as otherwise dust may enter the unit or hazardous laser

radiation may be emitted.

The audio playback of the coaxial output depends on

the recording format of the inserted disc. The different

possibilities are shown in the following table.

Disc

Sound recording

format

Signal at the coaxial

output

DVD

Dolby Digital

(AC-3)

PCM

PCM / Raw (two-channel)

(48 KHz / 16 Bit)

DTS RAW

Linear PCM Linear PCM (two-channel)

MPEG1 / MPEG2

MPEG audio signal or

PCM (two-channel) (16-bit)

CD Linear PCM

PCM

(sampling rate 44.1 kHz)

MP3 MP3

PCM

(sampling rate 44.1 kHz)

Television set

Scart (optional)

Audio/video cable

(optional)

DVD player

Coaxial cable

(optional)

or optical cable (optional)

To the coaxial input

To the optical input

Decoder or ampliﬁ er with Dolby

Digital (AC-3) or MPEG (optional)

(loudspeaker connections

optional)

5....-05-DVD 4602 AEG D_GB 22 16.03.2004, 12:16:24 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG dvd 4602 hc Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info