Bedienungsanleitung AEG dvd 4602 hc (Seite 26 von 36) (Deutsch, Englisch)

370819

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH

RADIO MODE

Setting the Frequency Band (Radio)

Band Selection

In the radio mode, press the PAUSE/BAND button to

switch between FM and MW.

Automatic Station Search

1. If the SEARCH button is pressed in radio mode and

the automatic station search is activated, the unit

searches for and stores all available radio stations.

If more than 40 stations are found, the search stops

and the unit switches to the ﬁ rst station found.

2. Press “F.FWD” or “F.RWD“ to determine the direction

of search. As soon as the unit ﬁ nds a station the

search is stopped.

Manual Search

During automatic search mode press the FF or FR but-

tons. Each time the FF or FR button is pressed the unit

changes the search frequency in steps of 50 kHz (FM) or

9 kHz (MW).

Storing Stations

1. As soon as the desired station has been correctly

tuned into, it can be stored using the MEMORY /

STOP button. Two asterisks then ﬂ ash in the display,

followed by the station frequency.

2. With the number buttons you can then change

directly to the desired station (insofar as this has

been stored). There are a total of 40 station storage

locations available. If the station number is less than

10, the ﬁ gure 0 has to be entered ﬁ rst.

Example: in order to change to the station stored in

location 9, enter the ﬁ gures 09. If you enter a ﬁ gure

above 40, the system automatically changes to

storage location 40.

Direct Input of the Station Frequency

If the frequency consists of four ﬁ gures, the input has

to be conﬁ rmed with the SELECT button. Example: If

you enter the ﬁ gure 8780 and press the SELECT button,

the system changes to the station transmitting on the

frequency 87.80 MHz. On the other hand, if you enter

10620 (i.e. a number with ﬁ ve digits), it is not necessary

to press the SELECT button.

Direct Station Selection

It is possible to select the desired (stored) station directly

using the number buttons. First press the SELECT but-

ton and then the storage location. If the storage location

is below 10, please enter a 0 ﬁ rst (example: in order to

select the station stored at storage location 9, enter 09).

PS This stands for program server. This function

provides information on the station, e.g. trafﬁ c

information, news, weather information etc. If no

signal is available, „NO-PS“ is displayed.

PTY stands for programme type. The programme type

of the station is shown. If no signal is available

„NO-PTY“ is displayed.

RT stands for radio text: The text information of the

RDS signal is forwarded. If no signal is available

„NO-PTY“ is displayed.

CLK stands for clock. The date and time are shown. If

no signal is available „NO_CLK“ is displayed.

Deleting Stations

During playback press the SELECT button. The display

„---“ disappears. Now enter the station to be deleted

and press the CLEAR button. The station is now deleted

and the device changes automatically to the transmis-

sion frequency 87.5 MHz. The deleted station initially

remains in the station list. As soon as you change to

another station or call up another function the station is

deleted permanently.

MISCELLANEOUS

Standby Mode

Press the STANDBY button during standby mode in

order to return the player to the mode in which it was

before it was changed to standby. The device starts in

the DVD mode.

PAL / NTSC

With the PAL/NTSC button you can change between the

television norm settings NTSC, PAL and MULTI (Multi =

automatic selection). Note: With this button you can only

adjust the output signal of the player, not the norm used

by the television set.

Function Selection

By pressing the FUNCTION button repeatedly (during

playback) it is possible to change between the following

operating modes: DVD - AUX IN - FM.

Volume +/-

1. During playback the volume can be set with the

VOL+ and VOL- buttons. In the SPDIF output mode

(DVD) the volume cannot be adjusted using these

buttons.

2. First press the VOL-SET button and then adjust the

desired level using the VOL+ and VOL-buttons.

Note: This function is not available in the radio mode.

Switching between Mono and Stereo (FM)

In FM mode press the ZOOM/ST button in order to

switch between stereo and mono reception. The current

reception mode is shown in the display.

Playing back and displaying MP3, WMA and JPEG

DISCS

Title Display (Menu Selection)

Call up the main directory using the MENU button. With

the arrow buttons you can change to the desired sub-

directory. Conﬁ rm your choice with the SELECT button.

With the arrow buttons you can return at any time to the

higher-level directory.

Note: The F.FWD and F.RWD buttons have no function

in this mode. With the SKIP- and SKIP+ buttons you can

switch between the individual pages on the screen.

5....-05-DVD 4602 AEG D_GB 26 16.03.2004, 12:16:26 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG dvd 4602 hc Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info