Bedienungsanleitung Aeg-electrolux cf 260 (Seite 41 von 100) (Deutsch, Englisch, Holländisch, Portugiesisch, Spanisch)

361847

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

0 Pull the emptied grounds container

out until it is under the coffee dis-

penser, to collect the descaling solu-

tion (Fig. 42).

The "Empty grounds container" indica-

tor (Fig. 3, j) comes on and remains

illuminated for as long as the grounds

container is pulled out.

0 Press the "Descale" key (Fig. 3, e) for

3 seconds. The indicator changes from

flashing to constantly on. The program

is ready. The descaling process must

not be interrupted.

You must first descale the hot-water/

steam nozzle, before the automatic

process can begin.

0 Place a cup or jug with a capacity of at

least 200 ml under the hot-water noz-

zle. Turn the Selection dial for steam

and hot water (Fig. 1, D) to the

position (Fig. 43). Keep the selection

dial opened until the pump switches

off and descaling solution stops run-

ning out of the nozzle.

0 Turn the Selection dial for steam and

hot water (Fig. 1, D) back to the

position (Fig. 43). The automatic des-

caling process now starts through the

coffee-making unit.

During the descaling process, the "Des-

cale" key (Fig. 3, e) indicator is con-

stantly illuminated.

Preparing the coffee machine for

phase 2

Phase 1 of the descaling process fin-

ishes after around 36 minutes. This is

signalled by the "Fill water tank" indi-

cator (Fig. 3, k) and the "Empty

grounds container" indicator (Fig. 3, j)

flashing. The indicator flashes

(Fig. 44).

0 Rinse the water tank out and fill with a

maximum of 1 litre fresh water.

0 Empty the grounds container and push

it just far enough back into the coffee

machine to catch the water which

drains out of the coffee dispenser

(Fig. 42).

Phase 2: flushing

0 Place a cup or jug with a capacity of at

least 200 ml under the hot-water noz-

zle.

0 Turn the Selection dial for steam and

hot water (Fig. 1, D) to the posi-

tion (Fig. 43). Keep the selection dial

opened until the pump switches off

and flushing water stops running out

of the nozzle.

0 Turn the Selection dial for steam and

hot water (Fig. 1, D) back to the

position (Fig. 43). The automatic fresh-

water flushing process now starts

through the coffee-making unit. It

takes approximately 5 minutes.

The flushing process – and with it the

complete descaling program – is fin-

ished when the indicator is on and

the indicator flashes.

0 Empty the coffee grounds container.

0 Thoroughly rinse the water tank and

fill with fresh water.

The coffee machine is now ready for

use.

After running the descaling program,

you are advised to throw away the first

cup of coffee from the machine.

13.7 Ordering Accessories

To ensure years of satisfaction with

your coffee machine and prevent

faults arising, it is very important to

regularly clean and descale the coffee

machine. The original cleaning tablets

and descalant are obtainable direct

from us.

If you live in Germany, please call our

Order Hotline

Tel. 0 18 01-20 30 90.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aeg-electrolux cf 260 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info