Bedienungsanleitung Aeg-electrolux cp 2200 (Seite 45 von 132) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

361354

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

Increase the coffee quantity, see

„Changing and Saving the Coffee

Quantity“ page 38.

– The grinding texture is set too

coarse. Set the grinding texture to a

finer grade, see „Setting the

Grinding Texture“ page 38.

• ...the crema is too weak?

– Use fresh water.

– Use fresh beans or fresh coffee pow-

der.

– Clean the coffee-making unit, see

„Cleaning the Coffee-making Unit",

page 41.

• ...milk is not frothy enough?

– The milk is too hot or too old or the

fat content is too high. Use suitable

milk.

– Blocked steam nozzle. Clean the

steam nozzle, see page 37.

– The air intake in the frothing aid is

blocked. Clean the frothing aid, see

page 37.

• ... the bean container will not locate

on the grinder?

– Coffee bean residue on or around

the grinder: Remove coffee bean

residue from the grinder, see

page 40.

– Coffee bean residue is jammed in the

bean container lock. Clear the bean

container lock of coffee bean residue.

• ... the grinder makes very loud noises

when grinding?

– The grinder is blocked by a foreign

body. Remove the foreign body as

described in this manual, refer to

„Cleaning the Grinder" page 40. If

necessary, have the coffee machine

checked by the Customer Service

Centre.

– You can continue to use your coffee

machine with ground coffee.

• ... the coffee-making unit will not

come out?

– The coffee-making unit is not in the

base position.

–Re-assemble the appliance and

switch on.

–Now switch the appliance off

again in the normal way. The

coffee-making unit runs to the

base position.

–Remove the coffee-making unit,

refer to „Cleaning the Coffee-

making Unit", page 41.

• ... the coffee-making unit will not fit

back in?

– The coffee-making unit is not closed.

Turn the service lever to close the

coffee-making unit.

– The latching lever is not up. Push the

metal clip up, and insert the coffee-

making unit, see page 42.

• ... the coffee machine has to be

transported?

– Keep the original packaging as

transport protection. It is important

to use the original film as a protec-

tion against scratches.

– Secure the coffee machine against

jarring.

– Empty the coffee machine tank and

container and allow any remaining

moisture in the system to steam off.

This will protect your coffee machine

from being damaged by freezing in

cold weather.

To steam off the system, remove

water tank and then select the

steam function. When no more

steam is released, turn off the steam

tap and switch off the coffee

machine. Allow the appliance to cool

before packing.

– Care should also be taken with the

location of the coffee machine –

especially in cold weather, when

damage can be caused by freezing.

17 Using the Total Cups

Counter

The coffee machine has the facility to

display the total number of cups of

coffee made.

822_949_318 CP2..._defnep.book Seite 45 Freitag, 2. November 2007 6:30 18

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aeg-electrolux cp 2200 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info