Bedienungsanleitung Aeg-electrolux precision at 6000 (Seite 10 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

378773

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Operating Instructions

Prior to using for the first time

0 Plug the mains plug into the mains

socket.

0 To avoid the build up of unpleasant

odours, the appliance should be placed

near an open window and operated a

few times at the maximum browning

setting without any bread.

Toasting bread

0 Plug the mains plug into the mains

socket.

0 Using the browning control (Figure 1/C

and Figure 2) adjust steplessly the

browning setting from 1-6 as required.

Setting 1 for lightest browning. Setting

6 for darkest browning.

An automatic test is performed on first

turning the selector switch from the

"0" position. All indicator lamps light

briefly and an acoustic signal sounds.

Then the selector indicator lights cor-

responding to the set degree of brown-

ing.

Use a setting between 1 and 3 when

you first start toasting. If the toast is

not browned to your liking, set the

adjuster lower or higher, higher for

example when toasting rye or dark

bread. When toasting only 1 slice and

also when toasting bread that is no

longer fresh, use a slightly lower

browning setting.

We would recommend to adjust a set-

ting that the toast is browned to a „gol-

den yellow“ or „light-brown“ colour. The

electronic toasting time regulator

ensures that once a browning setting

has been chosen, the results are always

the same for the same type of bread.

0 Insert bread for toasting.

0 Press the bread lift button (Figure

1/D and Figure 2).

The toaster switches on and the bread

moves down.

During toasting, the browning degree

selector goes out in steps.

When the required degree of browning

has been reached, the toaster switches

off automatically and an acoustic sig-

nal sounds.

The slices of toast are lifted up ready

for removal.

0 After use, turn the browning degree

selector to position "0" and remove the

plug from the socket.

If you want to turn off the acoustic

signal permanently, use the slide

switch on the underside of the appli-

ance (Figure 1/N and Figure 7).

Stop button

(Figure 1/G and Figure 2)

If you want to interrupt toasting, press

the stop button. The appliance

switches off and the toast is lifted up.

Once chosen, the browning setting

remains unchanged.

Defrost button

(Figure 1/F and Figure 2)

Press the defrost button when toasting

frozen bread. This lengthens the toast-

ing time.

Warm up button

(Figure 1/E and Figure 2)

To warm up toasted bread press the

warm up button to keep the toast

warm and crisp.

Roll rack

Caution! The roll rack will become hot

during toasting, do not touch.

0 Fold up the roll rack: Press button (Fig-

ure 1/J) down (Figure 3).

0 Place rolls or other bread for crisping

on the rack, turn the browning control

to the required browning setting.

Caution! When the roll rack is used,

the maximum browning setting must

be no higher than setting 2 .

0 Switch on the toaster using the bread

lift button (Figure 1/D).

822_848_335 AT6000.book Seite 10 Freitag, 28. September 2007 10:16 22

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aeg-electrolux precision at 6000 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info