Bedienungsanleitung AEG F65022IM0P (Seite 26 von 64) (Deutsch, Englisch, Holländisch, Französisch)

556111

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

7.2 Setting and starting a

programme

Setting mode

For some settings it is necessary that the

appliance is in setting mode.

Press the on/off button to activate the

appliance. The appliance is in setting

mode when all the programme indica-

tors come on and the display shows 2

horizontal status bars. If the control pan-

el does not show this condition, press

and hold, at the same time Delay and

Start until the appliance is in setting

mode.

Starting a programme without

delay start

1. Open the water tap.

2. Press the on/off button to activate

the appliance. Make sure that the ap-

pliance is in setting mode.

3. Close the appliance door.

4. Press Program again and again until

the indicator of the programme you

want to set comes on. You can also

set the applicable options.

• The duration of the programme

flashes in the display.

• The indicators of the phases that

are foreseen for the programme

come on.

5. Press Start to start the programme.

• When the programme starts, only

the indicator of the running phase

stays on.

• The programme duration starts to

decrease with steps of 1 minute.

Starting a programme with

delay start

1. Set the programme.

2. Press Delay again and again until the

display shows the delay time you

want to set (from 1 to 24 hours).

• The Delay indicator comes on.

• The delay time flashes in the dis-

play.

• The indicators of the phases that

are foreseen for the programme

go off.

3. Press Start to start the countdown.

• The countdown starts to decrease

with steps of 1 hour.

When the countdown is completed, the

programme starts. The indicator of the

running phase comes on.

Opening the door while the

appliance operates

If you open the door, the appliance

stops. When you close the door, the ap-

pliance continues from the point of inter-

ruption.

Cancelling the delay start

while the countdown operates

When you cancel the delay start, also the

programme is cancelled.

1. Press and hold, at the same time, De-

lay and Start until all the programme

indicators come on and the display

shows 2 horizontal status bars.

2. Set the programme again.

Cancelling the programme

1. Press and hold, at the same time, De-

lay and Start until all the programme

indicators come on and the display

shows 2 horizontal status bars.

Make sure that there is detergent

in the detergent dispenser be-

fore you start a new programme.

At the end of the programme

The display shows 0 and the end indica-

tor comes on.

1. Press the on/off button to deactivate

the appliance.

2. Close the water tap.

If you do not press the on/off

button, the AUTO OFF function

automatically deactivates the ap-

pliance a few minutes after the

end of the programme.

This helps to decrease the ener-

gy consumption,

www.aeg.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG F65022IM0P Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info