14
Rinse aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and
spot and streak free drying. The dispenser, which is positioned inside the door, holds
about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes,
depending upon the dosage setting.
Filling with rinse aid
1. Open the container by turning the lid (A)
anticlockwise.
2. Add the rinse aid until the container is
completely full.
The indicator (B) will be completely dark.
3. Top up the rinse aid when the rinse aid
indicator light on the control panel
illuminates.
If rinse aid refilling is necessary, the rinse
aid indicator light will illuminate only in
setting mode and at the end of the washing
programme.
During the run of the programme it will
remain off.
Ensure that the lid is closed after every
refill.
Do not put liquid detergent in the rinse aid
compartment. Clean up any rinse aid spilt
during filling with an absorbent cloth to avoid
excess foaming during the next wash.
Adjusting the dose
According to the finish and drying results
obtained, adjust the dose of rinse aid by
means of the 6 position selector (C) (position 1
minimum dosage, position 6 maximum
dosage).
Increase the dose if there are drops of water or
lime spots on the dishes after washing.
Reduce it if there are sticky whitish streaks on
the dishes.
