Bedienungsanleitung AEG FSK93600P (Seite 13 von 56) (Deutsch, Englisch)

688204

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

The display shows the default option

value in parenthesis.

4. Press to change the value from

OFF to ON or vice versa.

If you select Delay and press , the

display shows the number of hours

available for the delay start. Select the

desired delay time and press

confirm.

5. Press repeatedly until the display

shows the selected programme.

7.3 XtraDry

Activate this option to boost the drying

performance.

XtraDry is a permanent option for all

programmes other than ECO 50°. It is

automatically activated in next cycles.

This configuration can be changed at any

time.

Every time ECO 50° is

activated, XtraDry is off and

needs to be chosen

manually.

Activating XtraDry deactivates TimeSaver

and vice versa.

7.4 TimeSaver

TimeSaver allows to reduce the duration

of a selected programme by

approximately 50%.

This option increases the pressure and

the temperature of the water. The

washing and the drying phases are

shorter.

The washing results are the same as with

the normal programme duration. The

drying results can decrease.

Activate TimeSaver the following way:

Select a programme and press

If TimeSaver is applicable to the selected

programme, the display shows two

values with corresponding programme

durations.

• Fast: select the value to activate

TimeSaver and press to

confirm.

• Normal: select the value to

deactivate TimeSaver and press

to confirm.

Activating TimeSaver deactivates XtraDry

and vice versa.

BEFORE FIRST USE

When you activate the appliance for the

first time, you need to set the language.

The default language is English.

1. Set the language.

• Press to confirm English.

• Select a different language and

press

to confirm.

2. Make sure that the current level of

the water softener agrees with the

hardness of the water supply. If

not, adjust the level of the water

softener.

3. Fill the salt container.

4. Fill the rinse aid dispenser.

5. Open the water tap.

6. Start a programme to remove any

residuals from the manufacturing

process. Do not use detergent and

do put dishes in the baskets.

After starting the programme, the

appliance recharges the resin in the

water softener for up to 5 minutes. The

washing phase starts only after this

procedure is complete. The procedure is

repeated periodically.

8.1 The water softener

The water softener removes minerals

from the water supply, which would have

a negative effect on the washing results

and on the appliance.

The higher the content of these minerals,

the harder your water is. Water hardness

is measured in equivalent scales.

The water softener should be adjusted

according to the hardness of the water in

your area. Your local water authority can

advise you on the hardness of the water

in your area. It is important to set the

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG FSK93600P Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von AEG FSK93600P

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info