Getting started
1. Place the machine on a at surface.
When starting the machine for
the rst time, ll the tank with cold
water. Start the machine with the
ON/OFF switch. Let a full tank of
water pass through the machine
once or twice to clean it, without
using paper lter or co ee.
3. Insert a size 1x4 paper lter in the
lter holder and ll it with ground
co ee. For average strong co ee
onemeasuringspoon(approx.6-7
g) per cup is su cient. Close the
water tank lid and place the jug
(complete with lid) onto the warm-
ing plate.
2. Making coff ee: open the lid and
ll the water tank with fresh cold
water up to the desired level. There
is a gauge for 2–10 big cups / 4–15
small cups in the water tank and on
the co ee jug. (The machine must
not be used with empty tank!)
GB
4. Start the machine with the ON/
OFF switch. The power indicator
light will come on and hot water
will ow into the lter. When water
has stopped owing, the warming
plate keeps the co ee hot until the
machine is turned o with the ON/
OFF switch.
5. If the jug is removed, the lter
valve prevents co ee from dripping
onto the warming plate. (While
boiling, the jug must not be
removed for longer than 30 sec-
onds or the lter will over ow.)
