Bedienungsanleitung AEG KF33XX (Seite 6 von 32) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

697623

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

www.aeg.com

ENGLISH

Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and

spare parts. They have been designed especially for your product. This product is designed with the environment in

mind. All plastic parts are marked for recycling purposes.

COMPONENTS

A. ON/OFF switch with power indicator light

B. Water tank

C. Water level indicator

D. Hinged lid

E. Filter holder with anti-drip valve

F. Coee jug with graduation on both sides

G. Warming plate

H. Power cord & plug

Picture page 2-3

GETTING STARTED

1 Place the machine on a at surface. When starting the machine for the rst time, ll the tank with cold water. Start the

machine with the ON/OFF switch. Let a full tank of water pass through the machine once or twice to clean it, without

using paper lter or coee.

2 Making coee: open the lid and ll the water tank with fresh cold water up to the desired level. There is a gauge for cups on

the water tank and on the coee jug. (The machine must not be used with empty tank!)

3 Insert a size 1x4 paper lter in the lter holder and ll it with ground coee. For average strong coee one measuring

spoon (approx. 6-7 g) per cup is suicient. Close the water tank lid and place the jug (complete with lid) onto the warming

plate.

4 Start the machine with the ON/OFF switch. The power indicator light will come on and hot water will ow into the lter.

When water has stopped owing, the warming plate keeps the coee hot until the machine is turned o with the ON/OFF

switch. If the machine is not turned o manually, the Safety Auto-O function turns it o after 40 minutes.

5 If the jug is removed, the lter valve prevents coee from dripping onto the warming plate. (While boiling, the jug must not

be removed for longer than 30 seconds or the lter will overow.)

CLEANING AND CARE

6 Turn the machine o and unplug the power cord. Wipe all outer surfaces with a damp cloth. Coee jug and jug lid are

dishwasher proof. Never use caustic or abrasive cleaners, and never immerse the machine in liquid!

7 To clean the lter holder, lift up the handle and remove the lter holder. To clean the lter valve thoroughly, rotate it several

times while it is being rinsed.

8 Decalcifying is recommended regularly, depending on water hardness. Fill the tank with water and decalcier according to

product instructions, then follow steps 9 and 10.

9 Place the coee jug with its lid onto the warming plate. Allow the decalcier to take eect for about 15 minutes, then switch

the machine on. Switch it o when the solution has nished owing through. If necessary repeat the decalcifying process.

10 Allow the machine to run at least twice with plain water. Then thoroughly rinse the coee jug, lid and lter holder under

running water, activate the lter valve repeatedly during the rinse process.

Enjoy your new AEG product!

KF33xx_CoffeeMaker_AEG_NEW.indd 6 2017-06-05 11:19:18

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG KF33XX Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info