Bedienungsanleitung AEG KKE884500 (Seite 14 von 24) (Englisch)

690252

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

3. Remove the frothed milk regulator by pulling it outwards.

4. Wash all the components thoroughly with hot water and

mild washing-up liquid.

Make sure there are no milk residues left inside the holes

and the groove on the ne end of the frothed milk regula-

tor.

5. Check that the intake tube and spout are not clogged with

milk residues.

6. Replace the frothed milk regulator, milk spout and intake

tube.

7. Replace the milk container lid.

Cleaning the coee jug

Clean the jug with a damp cloth and mild washing up liquid.

N.B.: To avoid damaging the appearance of the jug, do

not wash in a dishwasher.

CHANGING AND SETTING MENU

PARAMETERS

When the appliance is ready, you can use the internal menu to

modify the following parameters and functions:

• Chooselanguage

• Rinsing

• Shut-otime

• Setclock

• Starttime

• Auto-start

• Temperature

• Waterhardness

• Programcoee

• Programcappuccino

• Programjug

• Programwater

• Descale

• Resettodefault

• Statistics

• Buzzer

• Contrast

Setting the language

To change the language on the display, proceed as follows:

• Pressthe icon (B2) to enter the menu. “CHOOSE LAN-

GUAGE” is displayed.

• PresstheOKicon(B9).

• Pressthe icons (B7) and (B8) until the required lan-

guage is displayed.

• PresstheOKicon(B9)toconrm.

• PresstheESC(B6)toexitthemenu.

N.B.: If you choose the wrong language, you can access

the menu directly to modify the parameter.

• Pressthe (B2) for at least 7 seconds until the appli-

ance displays the various languages.

• Choosetherequiredlanguageasdescribedinthesection

“Using the appliance for the rst time”.

Rinsing

This function enables you to obtain hotter coee.

Proceed as follows:

• Whenyou turn theappliance on, if youwant tomake a

small cup of coee (less than 60 cc), preheat the cup by

rinsing it with hot water.

• Ifontheotherhandmorethan2/3minuteshavepassed

since the last coee was made, before requesting another

coee, you must preheat the brewing unit by rst press-

ing the icon (B2) to enter the menu then the

icons (B7) and (B8) to select the “RINSING” function. Press

the OK icon (B9).

“RINSING... PLEASE CONFIRM” is displayed.

Press the OK icon (B9) again.

Deliver the water into the underlying drip tray or alterna-

tively use this water to ll (and then empty) the cup to be

used for the coee to preheat it.

Changing the length of time the appliance

remains on

The appliance is set by default to go o automatically 30 minutes

after the last coee has been made.

To change this interval (max. 120 min), proceed as follows:

• Pressthe icon (B2) to enter the menu and then the

icons (B7) and (B8) until “SHUT-OFF TIME” is dis-

played.

• PresstheOKicon(B9)toconrm.

• Pressthe icons (B7) and (B8) to set the time after

which the appliance will go o (after 1/2 hour, 1 hour, 2

hours).

• PresstheOKicon(B9)toconrm.

Hole

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG KKE884500 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von AEG KKE884500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info