Bedienungsanleitung AEG KM54WR (Seite 6 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

775151

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

www.aeg.com

ENGLISH

Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and

spare parts. They have been designed especially for your product. This product is designed with the environment in

mind. All plastic parts are marked for recycling purposes.

ACCESSORIES INFORMATION

The Meat Grinder and Express Slicer accessories are only included in the model KM4700. Other models from the

KM4xxx series can be used with these accessories, but they need to be bought separately.

COMPONENTS

A. Motor head (tiltable)

B. Speed selector

C. Housing

D. Tilt head locking lever

E. Working light

F. Attachment hub

G. Attachment shaft

H. Stainless steel bowl

I. Bowl clamping plate

J. Non-slip feet

K. Power cord

L. Wire whip

M. Coated at beater

N. Coated dough hook

O. Meat grinder*

P. Slicer/Shredder*

*depending on model

Picture page 2-3

GETTING STARTED

1 Before using the appliance for the rst time: Unplug the appliance. The Wire whip, Meat grinder* and Slicer/Shred-

der* should only be washed by hand in warm soapy water.The bowl, Flat beater and Dough hook are dishwasher-

proof. Clean the motor unit with a damp cloth. Caution: Never immerse the motor unit in water! Let all parts dry

thoroughly.

2 Place the appliance on a at surface. Tilting the Motor head up: Move the Tilt head locking lever to “Unlocked” with

one hand, tilt the Motor head up with the other hand. Once in up position it locks. Warning: Keep ngers and hands

away from areas with movable parts.

3 Move Speed selector to “OFF”. Place the Stainless steel bowl on the bowl clamping plate. Move the bowl clockwise

to lock into position. Warning: Never operate appliance with the attachments wire whip, at beater or dough hook

unless the bowl is in place.

4 Place an attachment on the Attachment shaft: Align the slot at the top of the attachment with the pin on the

Attachment shaft. Push attachment up and turn it counterclockwise until the pin is locked into position. To remove

attachment, move it clockwise and pull o.

5 Tilting the Motor head down: Move the Tilt head locking lever to “Unlocked” with one hand, tilt the Motor head

down with the other hand. Insert the plug in the main socket.

6 Move the Speed selector from “OFF” to desired speed (1-10). Once mixing is complete, turn the Speed selector to

“OFF” and unplug the appliance.

7 Work light and Power indicator light: If the appliance is plugged in and a speed is selected, a blue LED lights up

around the Speed selector. A work light will also light up over the working area. If the Speed selector is moved to

“OFF”, the working light will automatically shut o after 3 min.

8 Note: If the Speed selector is already turned on before the appliance is plugged in, both the blue Speed selector LED

light and the Work light will ash OFF and ON to let you know the Speed selector has been left on. Turn the Speed

selector to “OFF” and the lights will stop ashing. Then resume operating normally.

OTHER FUNCTIONS

9 Attachment hub: The appliance comes with a built in multipurpose Attachment hub. Read and carefully follow the

instructions that comes with each attachment for correct and safe use.

10 Adjusting the Attachment shaft: The appliance is adjusted at the factory so that the Flat Beater clears the bottom

of the Bowl. If the Flat Beater hits the bottom of the Bowl or is too far away from the sides, you can adjust it correctly.

See 11 for further instructions.

KM4xxx_StandMixer_AEG NO-FARSI.indd 6 2017-07-06 13:02:06

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG KM54WR Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info