Bedienungsanleitung AEG KPK742280M (Seite 33 von 168) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

794492

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

• Do not pull the appliance by the handle.

• Install the appliance in a safe and suitable

place that meets installation requirements.

• Keep the minimum distance from other

appliances and units.

• Before mounting the appliance, check if

the appliance door opens without restraint.

• The appliance is equipped with an electric

cooling system. It must be operated with

the electric power supply.

• The built-in unit must meet the stability

requirements of DIN 68930.

Cabinet minimum height

(Cabinet under the worktop

minimum height)

444 (460) mm

Cabinet width 560 mm

Cabinet depth 550 (550) mm

Height of the front of the

appliance

455 mm

Height of the back of the

appliance

440 mm

Width of the front of the ap‐

pliance

595 mm

Width of the back of the ap‐

pliance

559 mm

Depth of the appliance 567 mm

Built in depth of the appli‐

ance

546 mm

Depth with open door 882 mm

Ventilation opening mini‐

mum size. Opening placed

on the bottom rear side

560x20 mm

Mains supply cable length.

Cable is placed in the right

corner of the back side

1500 mm

Mounting screws 3.5x25 mm

2.2 Electrical connection

WARNING!

Risk of fire and electric shock.

• All electrical connections should be made

by a qualified electrician.

• The appliance must be earthed.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Always use a correctly installed

shockproof socket.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug and to the mains cable. Should

the mains cable need to be replaced, this

must be carried out by our Authorised

Service Centre.

• Do not let mains cables touch or come

near the appliance door or the niche below

the appliance, especially when it operates

or the door is hot.

• The shock protection of live and insulated

parts must be fastened in such a way that

it cannot be removed without tools.

• Connect the mains plug to the mains

socket only at the end of the installation.

Make sure that there is access to the

mains plug after the installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

• The electrical installation must have an

isolation device which lets you disconnect

the appliance from the mains at all poles.

The isolation device must have a contact

opening width of minimum 3 mm.

• Fully close the appliance door before you

connect the mains plug to the mains

socket.

• This appliance is supplied with a main

plug and a main cable.

2.3 Use

WARNING!

Risk of injury, burns and electric shock or

explosion.

• Do not change the specification of this

appliance.

• Make sure that the ventilation openings

are not blocked.

• Do not let the appliance stay unattended

during operation.

ENGLISH 33

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG KPK742280M Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info