601156
13
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
Position A for powder detergent (factory setting).
Position B for liquid detergent.
When you use the liquid detergent:
Do not use gelatinous or thick liquid detergents.
Do not put more liquid then the maximum level.
Do not set the prewash phase.
Do not set the delay start.
9.3 Setting a programme
1.
Turn the programme knob and set
the programme:
The indicator Start/Pauze flashes.
The display shows the programme
duration.
2.
If necessary, change the tempera-
ture, the spin speed, the cycle dura-
tion, or add available options. When
you activate an option, the indicator
of the set option comes on.
If you set something incorrect,
the display shows the message
Err.
9.4 Starting a programme
without the delay start
Press Start/Pauze button:
The indicator of button Start/Pauze
stops to flash. The indicator
is on.
The programme starts and the door
locks.
The programme time decreases with
steps of one minute.
9.5 Starting a programme with
the delay start
Press Startuitstel again and again until
the display shows the delay you want
to set.
Press Start/Pauze:
The appliance starts the countdown.
The indicator
goes on.
When the countdown is completed,
the programme starts automatically.
You can change or cancel the de-
lay start before you press Start/
Pauze. After pressing Start/Pauze
you can only cancel the delay.
To cancel the delay start:
1.
Press Start/Pauze to set the appli-
ance to PAUSE.
2.
Press Startuitstel. The display shows
.
3.
Press Start/Pauze again to start the
programme immediately.
9.6 Interrupting a programme
and changing the options
You can change only some options be-
fore they operate.
1.
Press Start/Pauze. The indicator
flashes.
2.
Change the options.
3.
Press Start/Pauze again. The pro-
gramme continues.
9.7 Cancelling a programme
1.
Turn the programme knob to Aan/
Uit position to cancel the pro-
gramme and to deactivate the appli-
ance.
2.
Turn the programme knob again to
activate the appliance. Now, you can
set a new washing programme.
The appliance does not drain the
water.
9.8 Opening the door
While a programme or the delay start
operates, the appliance door is locked.
The indicator
is on.
CAUTION!
If the temperature and level of
the water in the drum are too
high, you cannot open the door.
ENGLISH 13
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für AEG L50460FL wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von AEG L50460FL

AEG L50460FL Bedienungsanleitung - Holländisch - 24 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info