Bedienungsanleitung AEG L61470BI (Seite 16 von 36) (Englisch)

527313

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

• Press the button 8 to set the washing

machine to PAUSE;

• Press the button 9 once until the dis-

play shows the symbol

’;

• Press the button 8 again to start the

programme.

You can change the set delay on-

ly after you set the washing pro-

gramme again.

The Delay Start can not be selected with

DRAIN programme.

9.12 Altering an option or a

running programme

It is possible to change some options

before the programme carries it out. Be-

fore you make any change, you must

press the button 8 to pause the appli-

ance.

Changing a running programme is possi-

ble only by resetting it.

Turn the programme dial to

and then

to the new programme position.

Press the 8 button again to start the new

programme. The washing water in the

tub will not emptied out.

9.13 Interrupting a

programme

Press the button 8 to interrupt a pro-

gramme which is running, the corre-

sponding light starts blinking. Press the

button again to restart the programme.

9.14 Opening the door

When the machine is working and

through the delay time, the door is

locked.

If, for any reason, it is necessary to open

it, firstly press the button 8 to set the

machine to pause

If the light B after a few minutes goes

off, the door can be opened.

If the light B stays on and the door re-

mains locked, this means that the ma-

chine is already heating or that the water

level is too high. In this case the door

can not be opened.

If you cannot open the door but you

need to open it, turn the programme di-

al to

to switch the machine off. After

a few minutes the door can be opened

(pay attention to the water level and

temperature !) .

After closing the door, it is necessary to

set the programme and the options

again. Press button 8 to start the pro-

gramme again.

9.15 Cancelling a programme

Turn the selector dial to to cancel a

programme which is running. Now you

can select a new programme.

9.16 At the end of the

programme

The machine stops automatically. The pi-

lot light of button 8, the pilot lights A

and B go off. A blinking

will appear on

the display.

If you have set a programme or an op-

tion that ends with water in the tub, the

light B remains lit. The door is locked.

The water must be emptied out before

opening the door. During this time the

drum continues to turn at regular inter-

vals until water drain.

Follow the below instructions to empty

out the water:

• Turn the programme selector dial to

• Set the DRAIN or SPIN programme

• Reduce the spin speed, if needed

• Press the button 8

• When the programme has finished the

display shows a blinking

. The pilot

light B goes off. The door can be

opened.

Turn the programme selector dial to

to switch the machine off.

Remove the laundry from the drum and

carefully check that the drum is empty. If

you do not intend to carry out another

wash, close the water tap. Leave the

door open to prevent the formation of

mildew and unpleasant smells.

Stand by : once the programme has fin-

ished after a few minutes the energy sav-

ing system will be enabled. The bright-

ness of the display is reduced. By press-

ing any button the appliance will come

out of the energy saving status.

www.aeg.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG L61470BI Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von AEG L61470BI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info