Bedienungsanleitung AEG L7FE7261BI (Seite 21 von 52) (Englisch)

775061

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

dashes to indicate that no programme

was selected.

7.4 Temp.

When you select a washing programme,

the appliance automatically proposes a

default temperature.

The indicator Cold = cold water.

The indicator of the set temperature

comes on.

7.5 Spin

When you set a programme, the

appliance automatically sets the default

spin speed allowed for each programme.

By means of this button, you can

change the default spin speed or set

one of the additional spin options:

•Rinse Hold . The related indicator

comes on.

The final spin is not performed. The

water of the last rinse is not drained

out to prevent the fabrics from

creasing. The washing programme

ends with water in the drum.

The door stays locked and the drum

turns regularly to reduce creasing.

You must drain the water to unlock

the door.

If you touch the Start/Pause button,

the appliance performs the spinning

phase and drains the water.

•No spin . The related indicator comes

on.

Set this option to deactivate all spin

phases. The appliance performs only

the draining phase of the selected

washing programme. Set this option

for very delicate fabrics. The rinse

phase uses more water for some

washing programmes

•Quiet . The related indicator comes

on.

The intermediate and the final

spinning phases are suppressed and

the programme ends with water in the

drum. This helps to reduce creasing.

The door stays locked. The drum

turns regularly to reduce creasing.

You must drain the water to unlock

the door.

As the programme is very quiet, it is

suitable for use at night time when

cheaper electricity tariffs are

available. In some programmes the

rinses are performed with more water.

If you touch the Start/Pause button,

the appliance performs only the

draining phase.

The appliance empties the

water out automatically after

approximately 18 hours.

7.6 Prewash

With this option you can add a prewash

phase to a washing programme.

The corresponding indicator above the

touch button illuminates.

• Use this option to add a pre-wash

phase at 30 °C before the washing

phase.

This option is recommended for

heavily soiled laundry, especially if

containing sand, dust, mud and other

solid particles.

The options can increase the

programme duration.

7.7 Permanent Anti-stain

This option adds an anti-stain phase to

the programme. Use this option for

laundry with hard stains to remove.

To activate/deactivate this option, hold

the Prewash button pressed for 3

seconds until the indicator comes on/

goes off on the display.

Pour the stain remover into compartment

This option increases the

programme duration.

This option is not available

with a temperature lower

than 40 °C.

7.8 Permanent Soft Plus

Set this option to optimise the fabric

softener distribution and improve fabric

softness.

Recommended when you use fabric

softener.

ENGLISH 21

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG L7FE7261BI Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info