Bedienungsanleitung AEG L8FC8432BI (Seite 21 von 48) (Englisch)

775059

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

7. DIAL AND BUTTONS

7.1 Introduction

The options/functions are

not available with all

washing programmes.

Check the compatibility

between options/functions

and washing programmes in

the "Programme Chart". An

option/function can exclude

another one, in this case the

appliance doesn't allow you

to set incompatible options/

functions.

7.2 On/Off

Press this button for a few seconds to

activate or deactivate the appliance. Two

different tunes sound while switching the

appliance on or off.

As the Stand-by function automatically

deactivates the appliance after several

minutes to reduce the energy

consumption, you may need to activate

the appliance again.

For more details, refer to Stand-by

paragraph in Daily Use chapter.

7.3 Programme dial

For selecting the desired washing

programme. Refer to 'Programmes'

chapter for more details.

The position is a "Reset" function,

which stops and resets the running

programme. The display shows empty

dashes to indicate that no programme

was selected.

7.4 Temp.

When you select a washing programme,

the appliance automatically proposes a

default temperature.

Touch this button repeatedly until the

desired temperature value appears on

the display.

When the display shows the indicators

, the appliance does not heat the

water.

7.5 Spin

When you set a programme, the

appliance automatically sets the

maximum spin speed allowed, except for

programme Denim. With this option you

can decrease the default spin speed.

Touch repeatedly this button to:

•Decrease the spin speed. The

display shows only the spin speeds

available for the set programme.

• Additional spin options No Spin

Set this option to deactivate all spin

phases. The appliance performs the

only draining phase of the selected

washing programme. Set this option

for very delicate fabrics. The rinses

phase uses more water for some

washing programmes

• Activate the Rinse Hold option.

The final spin is not performed. The

water of the last rinse is not drained

out to prevent the fabrics from

creasing. The washing programme

ends with water in the drum.

The indicator remains displayed.

The door stays locked and the drum

turns regularly to reduce creasing.

You must drain the water to unlock

the door.

If you touch the Start/Pause button,

the appliance performs the spinning

phase and drains the water.

The appliance empties

the water out

automatically after 18

hours approximately.

• Activate the Silent option.

The intermediate and the final

spinning phases are suppressed and

the programme ends with water in the

drum. This helps to reduce creasing.

The indicator remains displayed.

The door stays locked. The drum

turns regularly to reduce creasing.

You must drain the water to unlock

the door.

As the programme is very quiet, it is

suitable for use at night time when

ENGLISH 21

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG L8FC8432BI Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info