Bedienungsanleitung AEG MBS 30 Turbo (Seite 22 von 130) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

463137

Zoom out

Zoom in

Vorherige Seite

1/130

Nächste Seite

MBS 30 Turbo

Rated Input ...........................................

No-load speed ............................................

Saw blade dia. x hole dia ...............................

Diamond wheel dia. x hole dia ......................

Cutting depth at 90° ......................................

Cutting depth at 45° ......................................

Weight without cable ....................................

English

SAFETY INSTRUCTIONS

WHEN WORKING WITH SAW BLADES

Cutting procedures

DANGER: Keep hands away from cutting area and the

blade. Keep your second hand on auxiliary handle, or motor

housing.

If both hands are holding the saw, they cannot be cut by

the blade.

Do not reach underneath the workpiece.

The guard cannot

protect you from the blade below the workpiece

Adjust the cutting depth to the thickness of the workpiece.

Less than a full tooth of the blade teeth should be visible below the

workpiece.

Never hold piece being cut in your hands or across your leg.

Secure the workpiece to a stable platform.

It is important to

support the work properly to minimize body exposure, blade binding,

or loss of control.

Hold power tool by insulated gripping surfaces, when

performing an operation where the cutting accessory may

contact hidden wiring. Cutting accessory contacting a „live“ wire

may make exposed metal parts of the power tool „live“ and shock

the operator.

When ripping always use a rip fence or straight edge guide.

This improves the accuracy of cut and reduces the chance of blade

binding.

WARNING! Read all safety warnings and all

instructions, including those given in the accompanying

brochure. Failure to follow the warnings and instructions may result

in electric shock,  re and/or serious injury. Save all warnings and

instructions for future reference.

Wear ear protectors. Exposure to noise can cause hearing loss.

The dust produced when using this tool may be harmful to health.

Do not inhale the dust. Use a dust absorption system and wear a

suitable dust protection mask. Remove deposited dust thoroughly,

e.g. with a vacuum cleaner.

Appliances used at many di erent locations including open air should

be connected via a residual current device (FI, RCD, PRCD) of 30mA

or less .

Always disconnect the plug from the socket before carrying out any

work on the machine.

Only plug-in when machine is switched o .

Do not use inserted tools not corresponding to the key data given in

these instructions for use.

Keep mains lead clear from working range of the machine. Always

lead the cable away behind you.

Before use check machine, cable, and plug for any damages or

material fatigue. Repairs should only be carried out by authorised

Service Agents.

Do not  x the on/o switch in the “on” position when using the saw

hand-held.

SAFETY INSTRUCTIONS

WARNING

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in

EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main applications of the tool. However if the tool is used for di erent applications, with

di erent accessories or poorly maintained, the vibration emission may di er. This may signi cantly increase the exposure level over the total

working period.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o or when it is running

but not actually doing the job. This may signi cantly reduce the exposure level over the total working period.

Identify additional safety measures to protect the operator from the e ects of vibration such as: maintain the tool and the accessories, keep

the hands warm, organisation of work patterns.

TECHNICAL DATA Fiber Cement Saw

Noise/vibration information

Measured values determined according to EN 60745.

Typically, the A-weighted noise levels of the tool are:

Sound pressure level (K = 3 dB(A)) ................................

Sound power level (K = 3 dB(A))....................................

Wear ear protectors!

Total vibration values (vector sum in the three axes)

determined according to EN 60745.

Vibration emission value a

sawing into wood ..........................................................

Uncertainty K= ..............................................................

cutting into stone ...........................................................

Uncertainty K= ..............................................................

................1010 W

................9250 min

-1

...........127 x 20 mm

........125 x 22,2 mm

....................32 mm

....................28 mm

...................3,3 kg

..........94 dB(A)

........105 dB(A)

........ 3,7 m/s

........ 1,5 m/s

........ 4,5 m/s

........ 1,5 m/s

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG MBS 30 Turbo Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info