Bedienungsanleitung AEG MMS 4209 (Seite 13 von 22) (Deutsch, Englisch)

552197

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

ENGLISH

How to Install the Driver

Minimum system requirements:

• Pentium 133 MHz or more

• Microsoft ® Windows ™ 98 SE/ME/2000/XP

• RAM 20 MB

• USB Port (2.0)

If your computer runs on Windows 2000 or a more recent sys-

tem, your MP3 player does not require any particular software or

drivers. However, the device does require the latest service pack

version to be installed. In the event of problems try to install

the current Microsoft service pack for the respective operating

system. For this, go to:

http://www.microsoft.com

ޥ NOTE:

Important: Windows 98SE users must install the driver prior

to hooking up the device with the PC. The PC may have to be

restarted. WIN 98 ﬁ rst edition is not supported.

• Place the supplied CD driver into the CD-ROM drive of

your PC.

• Click on ‘Driver’.

• Follow the instructions on how to install.

Connecting the MP3 player with your PC

1. Connect the MP3 player using the USB connection cable,

with your PC.

2. Insert the smaller USB connection into the USB jack (10)

of the MP3 player and the other end into a vacant USB

connection of your PC.

3. Once the connection has been successfully established the

display will read „READY“.

4. The MP3 player is displayed as a removable medium and

can be used as such.

5. To store and export ﬁ les, proceed as stated in the operating

software of your PC.

6. Once the ﬁ les have been transferred, ﬁ rst unlog the MP3

player from your PC. Proceed as stated in the operating

software of your PC to safely remove the hardware.

ޥ NOTE:

• Never remove the MP3 player from the PC during data

transfer. This even applies if the data transfer should

come to a halt. To separate the MP3 player from the PC,

follow the notes of your PC software to safely separate

hardware, i.e. the removable medium.

• Unplug the earplugs from the device before you start the

exchange of data.

• We can not be held responsible for the loss of ﬁ les as a

result of improper operation.

• The device is not DRM-compatible.

Charging the Battery

The device is operated by the integrated lithium ion battery. In

order to recharge the battery, connect the device to your com-

puter by means of the USB connection cable, or use the AC/DC

adapter of the accessory.

1. If the device is being charged up by the PC, the word

„READY“ appears in the display (7). The charging process is

indicated by the battery status indicator.

2. If charging takes place via the mains adapter, the device

switches on. The display is switched off after some time,

although the charging process is continued. The control

lamp on the mains adapter lights up in red during charging.

ޥ NOTE:

• If only one bar is visible in the battery status display (6),

the charge status of the battery is low and the battery

needs recharging.

• The battery charging time is approx. 5 hours, depending

on the charge status.

• The battery operating time depends on the operating

parameters (e.g. volume).

• The battery is fully charged

a) when the battery charge indicator (6) shows that it is

full.

b) when the control lamp on the mains adapter changes

from red to green.

• The PC must be switched on during charging in order for

the battery to be charged.

How to operate the MP3 player

Switching the MP3 player on

In order to switch the MP3 player on, press the

II key (1); the

name “AEG / WELCOME!” appears brieﬂ y in the display. The

length of time for which this display appears depends on the

amount of data. The menu then appears in the display (7).

Switching the MP3 player off

While a piece of music is being played back, keep the

II key

(1) held down until “

(Stopp)” appears in the display. If the

key (1) is held down a second time until “GOOD BYE!” appears

in the display, the device switches itself off.

ޥ NOTE:

• The MP3 player switches itself off automatically if not ope-

rated for a shorter period of time while in stop or pause

mode (see „Power“).

• If the „Display” option is activated in the menu the display

switches off after the set time in order to save electricity

(see „Display“).

• During the charging process the device cannot be swit-

ched off due to the automatic charging connection.

Earphones (Fig.4)

1. Release the strain relief (1) of the earphones by pressing

the centre of the release (2).

2. Guide the string (3) of the strain relief through the eyelet (2)

(Fig.1) of the MP3 player.

3. Connect the strain relief (1) with the earphones again until it

catches with a “click”.

4. Then connect the 2.5 mm Stereo jack plug (4) with the

earphones connection (9) (Fig.1).

05-MMS 4209 AEG Neu 13 18.01.2007, 12:42:58 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG MMS 4209 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info