Bedienungsanleitung AEG MMS 4211 (Seite 17 von 26) (Deutsch, Englisch)

552191

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

ENGLISH

How to Install the Driver

Minimum system requirements:

• Pentium 133 MHz or more

• Microsoft ® Windows ™ 98 SE/ME/2000/XP

• RAM 20 MB

• USB Port (2.0)

If your computer runs on Windows 2000 or a more recent sys-

tem, your MP3 player does not require any particular software or

drivers. However, the device does require the latest service pack

version to be installed. In the event of problems try to install

the current Microsoft service pack for the respective operating

system. For this, go to:

http://www.microsoft.com.

ޥ NOTE:

Important: Windows 98SE users must install the driver prior

to hooking up the device with the PC. The PC may have to be

restarted. WIN 98 ﬁ rst edition is not supported.

• Place the supplied CD driver into the CD-ROM drive of

your PC.

• Click on ‘Driver’.

• Follow the instructions on how to install.

Connecting the MP3 player with your PC

1. Connect the MP3 player using the USB connection cable,

with your PC.

2. Insert the smaller USB connection into the USB jack (10)

of the MP3 player and the other end into a vacant USB

connection of your PC.

3. Once the connection has been successfully established the

display will read „

“.

4. The MP3 player is displayed as a removable medium and

can be used as such.

5. To store and export ﬁ les, proceed as stated in the operating

software of your PC.

6. Once the ﬁ les have been transferred, ﬁ rst unlog the MP3

player from your PC. Proceed as stated in the operating

software of your PC to safely remove the hardware.

ޥ NOTE:

• Never remove the MP3 player from the PC during data

transfer. This even applies if the data transfer should

come to a halt. To separate the MP3 player from the PC,

follow the notes of your PC software to safely separate

hardware, i.e. the removable medium.

• We can not be held responsible for the loss of ﬁ les as a

result of improper operation.

Charging the Battery

The device is operated by the integrated lithium polymer battery.

In order to recharge the battery, connect the device to your

computer by means of the USB connection cable, or use the

AC/DC adapter of the accessory.

1. If the battery is charged via the PC the position of the ON/

OFF switch (6) has no effect on the charging process. The

charging process is indicated by the battery status indicator.

2. If charging takes place via the mains adapter, the device

switches on. The charging process is indicated by the

battery status indicator.

ޥ NOTE:

• When the battery is charged with the mains adapter the

device can be charged and operated at the same time if

the ON/OFF switch (6) is turned on.

• If only one bar is visible in the battery status display (F),

the charge status of the battery is low and the battery

needs recharging.

• The battery charging time is approx. 3 hours, depending

on the charge status.

• The battery operating time depends on the operating

parameters (e.g. volume).

• The battery is fully charged when the battery charge

indicator (F) shows that it is full.

• The PC must be switched on during charging in order for

the battery to be charged.

How to operate the MP3 player

Switching the MP3 player on

In order to switch on the MP3 player, turn the ON/OFF switch

(6) to ON and then keep the

II key (1) pressed down. After a

few seconds the letters “AEG“ appear brieﬂ y in the display. The

length of time for which the display remains on depends on the

quantity of data. The menu then appears in the display (7).

Switching the MP3 player off

1. While a track is playing, hold the

II button (1) down until

the display shows “. . . . . .“.

2. Then move the ON/OFF switch (6) to OFF.

ޥ NOTE:

• The MP3 player switches itself off automatically if not ope-

rated for a shorter period of time while in stop or pause

mode (see „Power“).

• If the „Backlight” option is activated in the menu the

display switches off after the set time in order to save

electricity (see „Display“).

• During the charging process the device cannot be swit-

ched off due to the automatic charging connection.

Headphones connection (9)

If you want to listen on headphones you should use headphones

with a 2.5 mm jack plug inserted into the „

“ headphone socket.

Playing a music ﬁ le

1. Switch on the MP3 player.

2. Select the „Music“ option in the menu. Press the

button (1) to conﬁ rm your choice.

3. Press the

II button (1). Playing of the ﬁ les stored on the

device starts.

4. Brieﬂ y press the

II button (1) to pause playback

(II appears in the display).

5. Brieﬂ y press the

II button (1) again to continue playback

from the same point.

05-MMS 4211 17 06.06.2007, 15:12:23 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG MMS 4211 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info