Bedienungsanleitung AEG MR 4139 BT (Seite 32 von 58) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

546370

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

English

Turn off the alarm sound

You have been woken and want to turn off the alarm? Press

the MODE button to turn off the alarm. It will sound again the

nextday.

Deactivate the alarm function

Proceed as described under “Set the alarm time”. When

reaching step 5, deactivate the alarm function. The alarm icon

disappears.

Radio mode

Search for a radio station

1. Fullyextendthetelescopicantenna.

2. You have two options in order to search for a radio sta-

tion:

• AdjustthedesiredradiostationusingtheUPor

DOWN button.

• KeeptheUPorDOWNbuttonpresseddownfor

ashortwhile.Thedevicewillstopatthenextradio

station.

3. In case of weak signal and noise, try to change the an-

tenna position for better reception.

Storing radio stations

1. Search for a radio station as described under “Search for

a radio station”.

2. PressandholdSET.Thememorylocationstartsashing.

3. Using the UP/DOWN buttons select the memory location

where the radio station is to be stored.

4. Press the SET button again. The radio station will be

stored.

NOTE:

The stored radio stations are lost as soon as the power sup-

ply has been interrupted.

Select the preset radio station

1. Shortly press the SET button.

2. Use UP or DOWN to select a memory location.

3. Press SET to listen to the selected radio station.

Sleep timer

1. Press the MODE button during radio operation. The

display will show “60” (minutes).

2. Use UP or DOWN to select 30, 60, 90, or 120 minutes.

Selecting “- - -” will deactivate the function.

3. Conﬁrm with MODE and the radio will turn off after the

pre-settimehasexpired.

NOTE:

Due to technical reasons, the activated function cannot be

displayed.

In order to cancel this function early, press the RADIO

button.

Playing back music ﬁles

There are two options to play back your own music ﬁles: with

cable or wireless via Bluetooth.

By cable

1. Connect an audio cable with a 3.5 mm stereo cinch plug

to the AUX IN connector (17).

2. Connecttheotherendofthecablewiththeexternal

audio device.

3. Set the switch (13) to “AUX IN •

BLUETOOTH“.

4. Startplaybackofyourexternaldevice.Usethecontrol(8)

to adjust the volume.

5. For the further procedure, please refer to the user manual

oftheexternalaudiosource.

NOTE:

Ifpossible,adjustthevolumeoftheexternalunittoacom-

fortable level.

Cordless via Bluetooth

Bluetooth involves a technology for wireless radio connec-

tion of devices over a short distance. Devices with Bluetooth

standard are transmitting between 2.402 and 2.480 GHz in

the ISM band (Industrial, Scientiﬁc and Medical). Interference

canbecausedforexamplebyWLAN-networks,DABradios,

cordless phones, or microwave ovens which work on the

same frequency band.

This device offers you the possibility to use a Bluetooth-

enableddevice.Thefunctionalradiusislimitedtoapprox.

15 metres depending on the surroundings and the unit used.

If your playing device supports the A2DP proﬁle (Advanced

Audio Distribution Proﬁle) and has a music-player function,

then you can also wirelessly transfer music to the device. The

A2DP proﬁle involves a multi-vendor Bluetooth proﬁle. By

streaming, stereo-audio signals are wirelessly transferred be-

tween the playing device (source) and the receiving device.

In order to be able to perform remote control of the source,

the player must support the AVRCP proﬁle (Audio Video

Remote Control Proﬁle).

Due to the different device manufacturers, models, and

software versions, a full functionality cannot be guaranteed.

• Logging on devices (Pairing)

Before you listen to music via the unit, you must pair the

devices.

1. Ensure, that the Bluetooth function is activated in

your player (e.g. mobile phone). For this, refer to the

operation manual of your player.

2. Set the switch (13) to “AUX IN •

BLUETOOTH“.

The device will peep several times to indicate that the

device is in pairing mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG MR 4139 BT Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info