Bedienungsanleitung AEG MRC 4106 RC (Seite 28 von 46) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Norwegisch)

551766

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

ENGLISH

General Safety Instructions

Read the operating instructions carefully before putting the

appliance into operation and keep the instructions including the

warranty, the receipt and, if possible, the box with the internal

packing. If you give this device to other people, please also pass

on the operating instructions.

• To avoid the risk of ﬁ re or an electric shock, you should not

expose the device to rain or moisture. Consequently, do not

use the device in the immediate vicinity of water - for examp-

le near a bath tub, a swimming pool or in a damp cellar.

• Use the device only for the intended purpose.

• Only connect the device at a properly installed plug socket.

Pay attention that the speciﬁ ed voltage corresponds to the

voltage of the plug socket.

• When using external mains supply, pay attention to the

correct polarity and voltage. Always place the batteries in

the correct direction.

• Assemble the device in such a way that the available

ventilation openings are not covered.

• Never open the housing of the device. Incorrect repairs can

constitute a considerable risk for the user. Should the device

become damaged, in particular the mains supply cable, do not

operate the device any longer, but rather have it repaired by an

expert. Check the mains supply cable regularly for damage.

• For safety reasons a broken or damaged mains lead may

only be replaced by an equivalent lead from the manufactu-

rer, our customer service department or a similary qualiﬁ ed

person.

• If the device is not used for a longer period, remove the plug

connector from the plug socket or take out the batteries.

These symbols may be found on the machine and are intended

to indicate the following:

The lightning symbol should advise the user of parts

in the inside of the device which carry dangerously

high voltage levels.

The symbol with an exclamation mark should advise

the user of important operation or maintenance

instructions in the accompanying documentation.

Children and Frail Individuals

• In order to ensure your children‘s safety, please keep all

packaging (plastic bags, boxes, polystyrene etc.) out of their

reach.

Caution! Do not allow small children to play with the foil as

there is a danger of suffocation!

• In order to protect children or frail individuals from the ha-

zards of electrical equipment, please ensure that this device

is only used under supervision. This device is not a toy. Do

not allow small children to play with it.

Symbols in these Instructions for Use

Important information for your safety is specially marked. It is

essential to comply with these instructions in order to avoid

accidents and prevent damage to the machine:

WARNING:

This warns you of dangers to your health and indicates

possible injury risks.

CAUTION:

This refers to possible hazards to the machine or other

objects.

ޥ NOTE: This highlights tips and information.

Special Safety Instructions

• Do not use the device in locations that are extremely hot,

cold, dusty or moist.

• Do not cover any ventilation slits with objects such as

magazines, tablecloths, curtains etc.

• Never touch the mains plug or lead with wet hands.

• Keep the mains lead away from heaters.

• Never put a heavy object on the electric lead.

• Keep the device away from vases, baths, wash basins etc. If

liquid enters the device this may cause serious damage.

Overview of the Components

1 Set minutes (MIN)

2 Deactivate/activate the radio-controlled time

adjustment / hour button (RCC/HR)

3 Time setting function key (MODE)

4 Alarm function key (ALARM)

5 Function key for delayed switch-off (SLEEP)

6 Wake-up interval (SNOOZE)

7 Function switch (AUTO/OFF/ON)

8 LED for activated alarm function (AL1/AL2)

9 Station scale

10 TUNING regulator

11 LED

12 BUZZ / VOLUME (volume) regulator

13 LED display for radio signal

Putting into function

• Select a suitable location for the radio recorder, such as a

dry, ﬂ at, non-slip surface on which it is easy to operate the

machine.

• Ensure that the radio recorder is sufﬁ ciently ventilated!

• Insert the plug into a properly installed 230 V, 50 Hz power

socket. Ensure that the voltage is the same as that indicated

on the model identiﬁ cation plate.

Set the time automatically

• After you have inserted the mains plug into the socket, the

time data are automatically taken over by the transmitter

after a few minutes. As long as the dot (13) is ﬂ ashing in the

display the device is searching for the radio signal. Once

a radio signal is found, - 0 0 -, - 0 1 - etc. appears in the

display. The correct time then appears in the display (the dot

(13) lights up).

• The time is automatically adjusted every hour on the hour by

the transmitter signal.

05-MRC 4106 RC AEG 28 06.03.2007, 12:31:42 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG MRC 4106 RC Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info