English
70
• Instandby,keeptheMEM.SET/NAP/MEM+button(1)pressedforapprox.3seconds.
Apointnextto (16)lightsup.Thedisplaylightturnsoffafterapprox.15seconds.
NOTE:
Press any button to switch on the brightness again for 15 seconds.
• Switch on the display light: To switch on the display light again permanently, press
anybuttonbriey.ThenkeepMEM.SET/NAP/MEM+button(1)pressedforapprox.
3seconds.Thepointnextto
(16) disappears.
Toggling the display
The following can be shown alternatingly on the display:
Time
Year Date Temperature
1. In order to activate this function, use the
button (9) to switch the device to standby.
2. Keep the / DISPLAY button (8) pressed, until “ ” appears briefly on the display.
Switch off toggling: To switch off Auto Toggle, keep the
/ DISPLAY button pressed
again in standby. “ ” appears briefly on the display.
NOTE:
Only the time is shown via the rotatable projector (20).
Temperature display
There are two options for displaying the current room temperature:
• BrieypresstheCLK.ADJ/TEMPbutton(5).
• PassyourhandovertheInfraredsensorsatadistanceof10cm(21).
Toggle temperature display between °C (Celsius) and °F (Fahrenheit)
Press the / DST/C-F button (7) whilst the temperature is displayed.
Display after using the infrared sensors
The following indicators are shown on the display if you pass your hand repeatedly over
the infrared sensors in standby.
Temperature
Alarm time AL1 Alarm time AL2 Time
The following indicators are shown on the display if you pass your hand repeatedly over
the infrared sensors when the device is in operation.
Radio frequency
Temperature Alarm time AL1 Alarm time AL2 Time