Bedienungsanleitung AEG MRC 4145 F (Seite 31 von 54) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

653960

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

English

14 Sleep timer active

Rear (not shown)

Dipole antenna

Power adapter socket - DC 5 V

Bottom (not shown)

Battery compartment

Start-up of the device/ Introduction

• Chooseasuitablelocationforthedevice.Suitablewould

be a dry, level, non-slip surface.

• Sensitivesurfacessuchasthedisplayarepossiblypro-

tected with foil. Remove these foils.

Display lighting

• Mains operation: The display is lit continuously. Press the

SNOOZE/LIGHT button in order to increase the intensity

of the display lighting for 8 seconds.

• Battery operation: The display backlight turns off auto-

matically. Press the SNOOZE/LIGHT button. The display

is lit for 8 seconds.

Power supply

1. Make sure the grid voltage corresponds to the ﬁgures on

the rating plate.

2. Plug the power supply unit into a properly installed

protective contact socket.

3. Connect the device with the power supply unit by

plugging the jack of the power supply unit into the

“DC 5 V

” jack.

CAUTION:

• Thisdeviceshouldonlybeusedwiththemainssupply

unit (included). Do not use it for other devices.

• Onlyusea5Vpowersupplyunit(

). A different

supply unit may damage the device.

NOTE:

• Disconnectfrommainspowersupplyduringlonger

periods of non-use.

• Ifyoudidnotinsertanotherreservebattery,thetime

and the station memory will be lost as soon as the

power supply is interrupted.

Inserting the reserve batteries

(Batteries are not included in the scope of delivery)

In case of power failure or if the power supply unit is pulled

from the plug, the settings are maintained if the reserve bat-

teries are inserted.

1. Open the battery compartment on the bottom side.

2. Insert three type AA/R6 1.5 V batteries. Check that the

polarity is correct (see battery compartment).

3. Close the battery compartment.

WARNING:

Donotexposethebatteriestointenseheat,suchassun-

light, ﬁre or similar. Danger of explosion!

CAUTION:

• Batteriesmayleakandlosebatteryacid.Ifthedeviceis

not used for a longer period of time, remove the bat-

teries.

• Differentbatteriesornewandusedbatteriesmaynot

be used together.

• Batteriesmustnotbedisposedofinthegarbage.

Please bring used batteries to competent collection

centers or back to the dealer.

NOTE:

Battery operation is also possible with the inserted batteries.

Switching the device on/ off

• PresstheRADIOON/OFFbuttontoturnthedeviceon

or off.

• Inordertofullydisconnectthedevicefromthemains,

unplug the power adapter from the wall socket.

Temperature display

The current ambient temperature is shown on the bottom

right of the display.

The temperature display can be switched between °C (De-

gree Celsius) and °F (Degree Fahrenheit).

1. Turn off the device.

2. Press the UP button repeatedly.

Setting the Clock

Automatic (in Standby only)

• Afterpluggingthemainsplugintothesocket,thetime

data from the DCF77 station is automatically transferred

after a few minutes. As long as the “

”symbolisash-

ing, the device is searching for the radio signal. If a radio

signal has been found, the “

” symbol lights up. The

correct time appears on the display.

• Thetimeisautomaticallysynchronizedapprox.every

2 hours via transmitter signal.

• Duringsummertime“

” appears in the display.

NOTE:

The signal can be received without problems within a

radiusofapprox.2000kmaroundFrankfurt/Main,but

interference may occur, depending on local conditions.

This may occur especially in buildings containing a high

percentageofmetal,aswellasinproximitytoTVsets,PCs,

mobile phones etc. which are switched on! If the reception

cannot be automatically adjusted after 10 minutes in spite

of the alignment of the integrated antenna, the reception

in the respective location is too weak. In this case, set the

time manually or change location.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG MRC 4145 F Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info