Bedienungsanleitung AEG PSB300 (Seite 3 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

563600

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Safe Operation Practices

for Snow Throwers

Training

1. Read the operating and service instruction manual care-

fully. Be thoroughly familiar with the controls and the proper

use of the equipment. Know how to stop the unit and

disengage the controls quickly.

2. Never allow children to operate the equipment. Never

allow adults to operate the equipment without proper

in struc tion.

3. Keep the area of operation clear of all persons, particularly

small children, and pets.

4. Exercise caution to avoid slipping or falling, especially

when operating in reverse.

Preparation

1. Thoroughly inspect the area where the equipment is to

be used and remove all doormats, sleds, boards, wires

and other foreign objects.

2. Disengage all clutches and shift into neutral before start-

ing the engine.

3. Do not operate the equipment without wearing ad e quate

winter garments. Wear footwear which will improve footing

on slippery surfaces.

4. Handle fuel with care; it is highly ﬂ ammable.

a) Use an approved fuel container.

b) Never add fuel to a running or hot engine.

c) Fill fuel tank outdoors with extreme care.

Never ﬁ ll fuel tank indoors.

d) Replace gasoline caps securely and wipe up spilled fuel.

5. Use a grounded three-wire plug-in for all units with electric

drive motors or electric starting motors.

6. Adjust the collector housing height to clear gravel or

crushed rock surface.

7. Never attempt to make any adjustments while the engine

is running (except where speciﬁ cally rec om mend ed by

man u fac tur er).

8. Let engine and machine adjust to outdoor tem per a tures

before starting to clear snow.

9. The operation of any powered machine can result in

foreign objects being thrown into the eyes. Always wear

safety glasses or eye shields during operation or while

performing an adjustment or repair.

Operation

1. Do not put hands or feet near or under rotating parts.

Keep clear of the discharge opening at all times.

2. Exercise extreme caution when operating on or crossing

gravel drives, walks, or roads. Stay alert for hidden hazards

or trafﬁ c.

3. After striking a foreign object, stop the engine, remove

the wire from the spark plug, thoroughly inspect the snow

thrower for any damage and repair the damage before

restarting and operating the snow thrower.

4. If the unit should start to vibrate abnormally, stop the

engine and check immediately for the cause. Vibration is

gen er al ly a warning of trouble.

5. Stop the engine whenever you leave the operating posi-

tion, before unclogging the collector/impeller housing or

dis charge guide and when making any repairs, adjust-

ments or inspections.

6. When cleaning, repairing, or inspecting make certain

the collector/impeller and all moving parts have stopped.

Dis con nect the spark plug wire, and keep the wire away

from the plug to prevent accidental starting. Disconnect

the cable on electric motors.

7. Do not run the engine indoors, except when starting it -

and for moving the snow thrower in or out of the building.

Open the outside doors; exhaust fumes are dangerous.

8. Do not clear snow across the face of slopes. Exercise

extreme caution when changing direction on slopes. Do

not attempt to clear steep slopes.

9. Never operate the snow thrower without proper guards,

plates or other safety protective devices in place.

10. Never operate the snow thrower near glass en clo sures,

automobiles, window wells, drop-offs, etc. without proper

adjustment of the snow discharge angle. Keep children

and pets away.

11. Do not overload the machine capacity by attempting to

clear snow at too fast a rate.

12. Never operate the machine at high transport speeds on

slippery surfaces. Use care when reversing.

13. Never direct discharge at bystanders or allow anyone in

front of the unit.

14. Disengage power to the collector/impeller when snow

thrower is transported or not in use.

15. Use only attachments and accessories approved by the

manufacturer of the snow thrower (such as wheel weights,

counterweights, cabs, etc.).

16. Never operate the snow thrower without good visibility

or light. Always be sure of your footing, and keep a ﬁ rm

hold on the handles. Walk; never run.

Maintenance and Storage

1. Check shear bolts, engine mounting bolts, etc., at frequent

intervals for proper tightness to be sure the equipment is

in safe working condition.

2. Never store the machine with fuel in the fuel tank inside

a building where ignition sources are present such as hot

water and space heaters, clothes dryers, etc. Allow the

engine to cool before storing in any enclosure.

3. Always refer to owner’s guide instructions for im por tant

details if the snow thrower is to be stored for an extended

period.

4. Maintain or replace safety and instructions labels, as

nec es sary.

5. Run the machine a few minutes after throwing snow to

prevent freeze-up of the collector/impeller.

Sichere Bedienung einer Schnee-

fräse

Vorkenntnisse

1. Lesen Sie die Bedienungs- und Wartungsanleitung sorg-

fältig. Machen Sie sich sorgfältigst mit den Steuerele-

menten und dem sachgemäßen Gebrauch des Gerätes

vertraut. Eignen Sie sich die Fähigkeit an, das Gerät schnell

stoppen und die Steuerelemente schnell abschalten zu

können.

2. Kindern darf die Bedienung des Gerätes unter keinen Um-

ständen gestattet werden. Bedienung des Gerätes durch

Erwachsene, die nicht sachgemäß eingewiesen wurden,

darf unter keinen Umständen gestattet werden.

3. Halten Sie den Verwendungsbereich frei von jeglichen

Personen, insbesondere von kleinen Kindern, und von

Haustieren.

4. Gehen Sie vor allem bei der Bedienung im Rückwärts-

gang vorsichtig vor, um Ausrutschen oder Hinfallen zu

vermeiden.

Vorbereitung

1. Inspizieren Sie sorgfältig den Bereich, in dem das Gerät

verwendet werden soll, und entfernen Sie alle Türvorleger,

Schlitten, Bretter, Drähte u.a. Fremdkörper.

2. Kuppeln Sie vollständig aus und schalten Sie in den

Leerlauf, bevor Sie den Motor anlassen.

3. Bedienen Sie das Gerät nicht ohne adäquate Winterbekle-

idung. Tragen Sie Schuhe, die einen sicheren Stand auf

rutschigem Boden begünstigen.

AEG PSB300 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info