17
Malfunction
Appliance does not work.
Possible Cause
Appliance is not switched
on.
Mains plug is not plugged
in or is loose.
Fuse has blown or is
defective
Socket is defective.
Mains malfunctions are to
be corrected by an
electrician.
The food is too warm.
Temperature is set too
cold.
Temperature is not
properly adjusted.
Turn the temperature reg-
ulator to a warmer
setting temporarily.
Please look in the “Initial
Start Up” section.
Remedy
Switch on the appliance.
Insert mains plug.
Check fuse, replace if nec-
essary.
Light bulb is defective.
Interior lighting does not
work.
Heavy build up of frost,
possibly also on the door
seal.
Appliance cools too much.
Door was open for an
extended period.
A large quantity of warm
food was placed in the
appliance within the last
24 hours.
The appliance is near a
heat source.
Door seal is not air tight
(possibly after changing
over the hinges).
Carefully warm the leaking
sections of the door seal
with a hair dryer (not hot-
ter than approx. 50 °C). At
the same time shape the
warmed door seal by hand
such that it sits correctly.
Open the door only as long
as necessary.
Turn the temperature reg-
ulation to a colder setting
temporarily.
Please look in the
“Installation location” section.
Please look in the “Changing
the Light Bulb” sections.
