Bedienungsanleitung AEG sbe 500 r (Seite 10 von 37) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

388513

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

18 19

SBE 500 R SBE 570 R SBE 600 R SBE 630 R SB2-630

.....500 W ...........570 W ............ 600 W .............630 W .............630 W

.....250 W ...........285 W ............ 300 W .............315 W .............315 W

0-2650 min

-1

. 0-2700 min

-1

...0-2800 min

-1

... 0-2800 min

-1

.......2800 min

-1

..........- .................. - .....................- ..................... - ..............2250 min

-1

..........- .................. - .....................- ..................... - ..............2800 min

-1

...1800 min

-1

.....1600 min

-1

...... 1300 min

-1

.......1300 min

-1

..........- .................. - .....................- ..................... - ................850 min

-1

..........- .................. - .....................- ..................... - ..............1300 min

-1

.39750 min

-1

...40500 min

-1

.... 42000 min

-1

.....42000 min

-1

.....42000 min

-1

.27000 min

-1

...24000 min

-1

.... 19500 min

-1

.....19500 min

-1

.....19500 min

-1

.......21 Nm ...........23 Nm ............23 Nm .............23 Nm ........25/24 Nm

.......13 mm ..........15 mm ............15 mm .............15 mm ............13 mm

.......15 mm ..........18 mm ............18 mm .............18 mm ............15 mm

.......10 mm ..........13 mm ............13 mm .............13 mm ............13 mm

.......20 mm ..........30 mm ............30 mm .............30 mm ............30 mm

.1,5-10 mm ... 1,5-13 mm ......1,5-13 mm ...... 1,5-13 mm ..... 1,5-13 mm

1/2"x20 ........1/2"x20 .......... 1/2"x20 ...........1/2"x20 ..........1/2"x20

.......43 mm ..........43 mm ............43 mm .............43 mm ............43 mm

......1,6 kg ............1,7 kg ............. 1,7 kg ..............1,7 kg .............1,7 kg

.........9 m/s

...........9 m/s

............. 9 m/s

..............9 m/s

.............9 m/s

........95 dB (A) .......95 dB (A) ......... 95 dB (A) ......... 95 dB (A) .........95

dB (A)

......106 dB (A) .....106 dB (A) ....... 106 dB (A) ....... 106 dB (A) .......106

dB (A)

ENGLISH

TECHNICAL DATA

Rated input ..............................................................................

Output ......................................................................................

No-load speed .........................................................................

1st gear .................................................................................

2nd gear ...............................................................................

Speed under load max. ...........................................................

1st gear .................................................................................

2nd gear ...............................................................................

Percussion rate........................................................................

Rate of percussion under load max. ........................................

Static jamming moment*, 1st gear/2nd gear ...........................

Drilling capacity in concrete .....................................................

Drilling capacity in brick and tile ..............................................

Drilling capacity in steel ...........................................................

Drilling capacity in aluminium ..................................................

Drilling capacity in wood ..........................................................

Drill opening range ..................................................................

Drive shank..............................................................................

Chuck neck diameter ...............................................................

Weight without cable ...............................................................

Typical weighted acceleration in the hand-arm area ...............

Typical A-weighted sound levels:

Sound pressure level (K = 3 dB(A)) ..........................................

Sound power level (K = 3 dB(A)) ..............................................

WARNING! Read all safety warnings and all

instructions, including those given in the accompanying

brochure. Failure to follow the warnings and instructions

may result in electric shock, re and/or serious injury.

Save all warnings and instructions for future reference.

SAFETY INSTRUCTIONS

Wear ear protectors. Exposure to noise can cause hearing

loss.

Use auxiliary handles supplied with the tool. Loss of

control can cause personal injury.

Hold power tool by insulated gripping surfaces, when

performing an operation where the cutting accessory

may contact hidden wiring or its own cord. Contact with

a „live“ wire will also make exposed metal parts of the power

tool „live“ and shock the operator.

Appliances used at many different locations including open

air must be connected via a current surge preventing switch.

Always wear goggles when using the machine. It is

recommended to wear gloves, sturdy non slipping shoes

and apron.

Sawdust and splinters must not be removed while the

machine is running.

Always disconnect the plug from the socket before carrying

out any work on the machine.

Only plug-in when machine is switched off.

Keep mains lead clear from working range of the machine.

Always lead the cable away behind you.

Do not use diamond core drills on hammer mode.

When working in walls ceiling, or oor, take care to avoid

electric cables and gas or waterpipes.

SPECIFIED CONDITIONS OF USE

The electronic drill/screwdriver can be universally used for

drilling, percussion drilling, screwdriving and cutting screw

threads.

Do not use this product in any other way as stated for

normal use.

EC-DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product is

in conformity with the following standards or standardized

documents. EN 60745, EN 55014-1, EN 55014-2,

EN 61000-3-2, EN 61000-3-3, in accordance with the

regulations 98/37/EC, 2004/108/EC

Rainer Kumpf

Manager Product Development

Winnenden, 2008-01-16

MAINS CONNECTION

Connect only to single-phase a.c. current and only to the

system voltage indicated on the rating plate. It is also

possible to connect to sockets without an earthing contact

as the design conforms to safety class II.

MAINTENANCE

The ventilation slots of the machine must be kept clear at all

times.

If the machine is mainly used for percussion drilling,

regularly remove collected dust from the chuck. To remove

the dust hold the machine with the chuck facing down

vertically, and completely open and close the chuck. The

collected dust will fall from the chuck. It is recommended to

regularly use cleaner for the clamping jaws and the

clamping jaw borings.

Use only AEG accessories and spare parts. Should

components need to be exchanged which have not been

described, please contact one of our AEG service agents

(see our list of guarantee/service addresses).

If needed, an exploded view of the tool can be ordered.

Please state the ten-digit No. as well as the machine type

printed on the label and order the drawing at your local

service agents or directly at: AEG Elektrowerkzeuge,

Max-Eyth-Straße 10, D-71364 Winnenden, Germany.

Measured values determined according to EN 60 745.

The data stated above apply for models with 230 - 240 V.

In case of deviating mains voltage, the data stated on the rating plate are applicable.

* Measured according to AEG norm N 877318

ENGLISH

SYMBOLS

Please read the instructions

carefully before starting the

machine.

Always disconnect the plug from the socket

before carrying out any work on the machine.

Accessory - Not included in standard

equipment, available as an accessory.

Do not dispose of electric tools together with

household waste material! In observance of

European Directive 2002/96/EC on waste

electrical and electronic equipment and its

implementation in accordance with national

law, electric tools that have reached the end

of their life must be collected separately and

returned to an environmentally compatible

recycling facility.

AEG sbe 500 r Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info