Bedienungsanleitung AEG sr 4314 cd (Seite 31 von 50) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Norwegisch)

407315

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

NORSK

ENGLISH

General Safety Instructions

Read the operating instructions carefully before putting the appli-

ance into operation and keep the instructions including the warran-

ty, the receipt and, if possible, the box with the internal packing.

• To avoid the risk of ﬁ re or an electric shock, you should not

expose the device to rain or moisture. Consequently, do not

use the device in the immediate vicinity of water - for examp-

le near a bath tub, a swimming pool or in a damp cellar.

• Use the device only for the intended purpose.

• Only connect the device at a properly installed plug socket.

Pay attention that the speciﬁ ed voltage corresponds to the

voltage of the plug socket.

• When using external mains supply, pay attention to the

correct polarity and voltage. Always place the batteries in

the correct direction.

• Assemble the device in such a way that the available

ventilation openings are not covered.

• Never open the housing of the device. Incorrect repairs can

constitute a considerable risk for the user. Should the device

become damaged, in particular the mains supply cable, do

not operate the device any longer, but rather have it repaired

by an expert. Check the mains supply cable regularly for

damage.

• For safety reasons a broken or damaged mains lead may

only be replaced by an equivalent lead from the manufactu-

rer, our customer service department or a similary qualiﬁ ed

person.

• If the device is not used for a longer period, remove the plug

connector from the plug socket or take out the batteries.

These symbols may be found on the machine and are intended

to indicate the following:

The lightning symbol should advise the user of parts

in the inside of the device which carry dangerously

high voltage levels.

The symbol with an exclamation mark should advise

the user of important operation or maintenance

instructions in the accompanying documentation.

Devices bearing this symbol work with a „class 1

laser“ for tracing the CD. The built-in safety switches

should prevent the user being exposed to dange-

rous laser light, which is invisible to the human eye,

when the CD compartment is opened.

Under no circumstances should these safety switches be

bypassed or manipulated, as this could result in a danger of

exposure to the laser light.

Children

• In order to ensure your children‘s safety, please keep all

packaging (plastic bags, boxes, polystyrene etc.) out of their

reach.

Caution! Do not allow small children to play with the foil as

there is a danger of suffocation!

• To protect children from the dangers posed by electrical

appliances, make sure that the cable is hanging low and that

children do not have access to the appliance.

Special safety information

This device works with

a class 1 laser.

Overview of the Components

1 CD compartment

CD STOP button

II CD PLAY/PAUSE button

4 REPEAT button

5 PROGRAM button (CD programming)

6 POWER ON control lamp

7 Function selector switch

(POWER OFF/CD/RADIO)

8 LCD display

9 BBS button(ON/OFF)

10 I

̇̇

SKIP button (reverse search)

̈̈

I SKIP button (forward search)

12 OPEN/CLOSE

Tab for opening the CD compartment

13 VOLUME +/- (volume control)

14 Band selection switch (AM / FM)

15 TUNING control

16 ANT aerial

17 Handle

18 Loudspeaker

Reverse Side

19 PHONES Headphone connection

20 Battery compartment

21 AC~ IN Mains connection

Start-up of the device/introduction

• Read the operating instructions thoroughly before the start-

up!

• Select an appropriate location for the device, e.g. a dry, ﬂ at,

non-slip surface on which the device can be easily operated.

• Make sure that the device is adequately ventilated!

• Connect the power cable supplied (see battery compart-

ment (20) if necessary) to a properly installed 230 V/50 Hz

safety power socket and the mains connector AC~ IN (21)

on the back of the machine. Ensure that the voltage is the

same as that indicated on the model identiﬁ cation plate.

The POWER ON (6) control lamp shows that the device is

switched on.

Inserting the Batteries (not supplied)

• Open the lid of the battery compartment (20) on the bottom.

• Insert 6 batteries of type UM2/R14 1,5V. Please ensure that

the polarity is correct (see the ﬂ oor of the battery compart-

ment)!

• If the device is not used for a long period of time, remove the

batteries to avoid the spilling of battery acid.

• If the power cable is connected, the batteries are switched

off automatically.

05-SR 4314 AEG 31 07.08.2006, 14:14:05 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG sr 4314 cd Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info