Bedienungsanleitung AEG SR 4320 CD (Seite 40 von 62) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Norwegisch)

64933

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

English

Playing CD’s

1. Push the function selection switch (16) to CD.

2. Open the CD compartment (3) by pulling the lid

upwards by the tab (4).

3. Insert an audio CD with the printed side facing up-

wards on to the central cone so that the CD clicks into

place and then close the lid of the CD compartment.

4. „- -“ appears in the display followed by the number

of tracks. Press the ̈II PLAY/PAUSE button (13) in

order to play the CD. The CD will play from the  rst

title.

5. By lightly pressing either the ̈̈I SKIP+/İ̇ SKIP-

buttons (8/12) you can jump one track forwards or

backwards. If the button is held down while you are

listening to a track you can search for a particular

piece of music

(İ̇ SKIP- = reverse, ̈̈I SKIP+ = forwards).

6. In order to remove a CD, press the ˾ STOP (stop)

button (7), open the CD compartment and lift the CD

out carefully.

Always keep the CD deck closed.

ޥ NOTE:

• If a disc has been incorrectly inserted „- -“  ashes

and

„no“

appears in the display.

• If no disc has been inserted „- -“  ashes and

„Er“ (error)

appears in the display.

• Playback of CDs produced by the user cannot be

guaranteed due to the large variety of software and

CD media available.

Description of the CD buttons

̈II PLAY/PAUSE (13) (play/pause)

With the CD running:

You can brie y interrupt and resume playback using this

button. The symbol PLAŸ  ashes in the display. Pressing

again continues playback.

İ̇ SKIP- (12) (reverse search)

With the CD running:

Press once = This starts the current track again from

the beginning.

Press twice = This jumps back to the previous track.

Press three times = This plays the song before etc. If the

button is kept pressed down, the machine

starts to search through the tracks.

̈̈I SKIP+ (8) (forward search)

With the CD running:

With this button you can jump to the following track or

the next track but one etc. If the button is kept pressed

down, the machine starts to search through the tracks.

REPEAT (11)

Press once = (the REPEAT emits a  xed light) the

current track is repeated continuously.

Press twice = (the REPEAT ALL emits a  xed light) the

whole CD is played continuously.

Press three times = all functions are cancelled. The normal

play mode is resumed.

RANDOM (10)

Press once = the display contains the word RAN-

DOM and the track number that is to

be played  rst. All tracks are played

back in random order.

Press twice = all functions are cancelled. The normal

play mode is resumed.

Programmed Play with the

PROGRAM Button

This can be used to program any desired sequence of

tracks.

1. Press the ˾ STOP (stop) button (7).

2. Press the PROGRAM button (9). „MEMORY 01“

(memory preset)  ashes in the display. Use the ̈̈I

SKIP+/İ̇ SKIP- buttons (8/12) to select the desired

track and then press the PROGRAM button again. The

display changes to memory preset 02.

3. Select the next track with the ̈̈I SKIP+/İ̇ SKIP-

button and press the PROGRAM button again. Repeat

the procedure until all the desired tracks are selected.

ޥ NOTE:

If the maximum space available for the tracks to

be programmed has been reached, the previously

programmed tracks are replaced if further tracks

are entered.

4. Press the ̈II PLAY/PAUSE button (13). The playback

starts. PLAŸ MEMORY appears in the display. With

this button you can also brie y interrupt the pro-

gramme.

5. Press once the ˾ STOP (stop) button to stop the

playback while retaining the program. The word

MEMORY disappears.

6. To resume the playback of the program press  rst the

PROGRAM button once and then the ̈II PLAY/PAU-

SE button.

7. In order to delete the programme, press the PRO-

GRAM button in stop mode. Then keep the ˾ STOP

button pressed down for approx. 3 sec.

The device stops automatically once the entire sequence

of programmed tracks is completed. The programmed

order of tracks remains in the memory until you change

to a di erent mode, remove the CD from the CD com-

partment or switch o the device.

05-SR 4320 CD AEG.indd 4005-SR 4320 CD AEG.indd 40 27.03.2008 9:03:14 Uhr27.03.2008 9:03:14 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG SR 4320 CD Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info