Bedienungsanleitung AEG TBS TB 50 THERMO BODEN (Seite 16 von 76) (Deutsch, Englisch, Holländisch, Französisch)

648290

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Operation – for users and qualied contractors

1.2 Other symbols in this documentation

Note

General information is identied by the adjacent

symbol.

» Read these texts carefully.

Symbol Meaning

Material losses

(appliance damage, consequential losses and envi-

ronmental pollution)

Appliance disposal

» This symbol indicates that you have to do something.

The action you need to take is described step by

step.

1.3 Information on the appliance

Symbol Meaning

Underfloor heating system (direct action)

1.4 Units of measurement

Note

All measurements are given in mm unless stated

otherwise.

2. Safety

2.1 Intended use

The heating mat provides direct underoor heating and

is used for electric underoor heating in individual areas,

e.g. bathrooms, kitchens, sauna lobbies, hallways or other

living areas and in indoor swimming pools and other wet

rooms.

This appliance is intended for domestic use. It can be

used safely by untrained persons. The appliance can also

be used in a non-domestic environment, e.g. in a small

business, as long as it is used in the same way.

Any other use beyond that described shall be deemed

inappropriate. Observation of these instructions and of

instructions for any accessories used is also part of the

correct use of this appliance.

2.2 General safety instructions

WARNING Injury

The appliance may be used by children aged 8 and

up and persons with reduced physical, sensory or

mental capabilities or a lack of experience and know-

how, provided that they are supervised or they have

been instructed on how to use the appliance safely

and have understood the resulting risks. Children

must never play with the appliance. Children must

never clean the appliance or perform user mainte-

nance unless they are supervised.

Material losses

Only operate the heating mat when fully installed

and with all safety equipment tted.

2.3 CE designation

The CE designation shows that the appliance meets all

essential requirements according to the:

◦ Electromagnetic Compatibility Directive

◦ Low Voltage Directive

2.4 Test symbols

See type plate label, label on the warranty card or in the

main junction box.

3. Settings

You can set the required oor temperature by means of

an external temperature controller.

The oor temperature which can be achieved depends

on the oor structure and the oor covering. Observe the

information in the operating and installation instructions

for the temperature controller.

3.4.1 Temperature controller with time switch

Energy saving operation is ensured by installing a tem-

perature controller with time switch.

Using a temperature controller with time switch means

that you can adapt the heating operation to your lifestyle

by specifying when the heating mat will switch on and off.

» Adjust the operating times so that it switches on a

certain amount of time before use. The necessary

time depends on the oor structure and the oor

covering.

» Adjust the time it switches off so that the appliance

switches off approximately half an hour before the

end of use.

Further information can be found in the operating and

installation instructions for the temperature controller.

4. Cleaning, care and

maintenance

The heating mat does not require any particular main-

tenance.

5. Troubleshooting

Problem Cause Remedy

The heating mat does

not provide the neces-

sary heating output.

The temperature

controller is not set

correctly.

Adjust the tempera-

ture controller to the

maximum heating

level. After waiting for

a short time, check

whether the floor is

warming up.

For temperature con-

trollers with a time

switch: Operating

times are not set cor-

rectly.

Check the time switch

operating times and

adjust if necessary.

There is no power. Check whether the

fuses/MCBs in your

fuse box have blown/

responded. If the

fuses/MCBs blow/

respond repeatedly,

notify your heating

contractor.

If you cannot remedy the fault, notify your qualied con-

tractor. To facilitate and speed up your request, provide

the number from the type plate (000000-0000-000000).

You will nd the type plate on the warranty card in these

instructions and in the main junction box.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG TBS TB 50 THERMO BODEN Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info