Bedienungsanleitung AEG TS 250 K (Seite 25 von 79) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

463235

Zoom out

Zoom in

Vorherige Seite

1/79

Nächste Seite

English

TS 250 K

Rated input ..................................................................... 1800 W

Rated current ..................................................................... 7,5 A

No-load speed ................................................................. 4800 min

-1

Saw blade dia. x hole dia ............................................250 x 30 mm

Saw blade thickness ........................................................... 1,8 mm

Max. Cutting depth at 90° ................................................... 90 mm

Max. Cutting depth at 45° ................................................... 62 mm

Weight without cable.......................................................... 41 kg

Noise/Vibration Information

Measured values determined according to EN 61029.

Typically, the A-weighted noise levels of the tool are:

Sound pressure level (K=3dB(A)) ........................................ 98 dB(A)

Sound power level (K=3dB(A)) ......................................... 111 dB(A)

Wear ear protectors!

WARNING! Read all safety warnings and all instructions,

including those given in the accompanying brochure. Failure

to follow the warnings and instructions may result in electric shock,

re and/or serious injury. Save all warnings and instructions for

future reference.

SAFETY INSTRUCTIONS

Wear ear protectors. Exposure to noise can cause hearing loss.

Always wear goggles when using the machine. It is recommended to

wear gloves, sturdy non slipping shoes and apron.

The dust produced when using this tool may be harmful to health.

Do not inhale the dust. Use a dust absorption system and wear a

suitable dust protection mask. Remove deposited dust thoroughly,

e.g. with a vacuum cleaner.

Appliances used at many dierent locations including open air should

be connected via a residual current device (FI, RCD, PRCD) of 30mA

or less.

Before doing any work on the machine, pull the plug out of the

socket.

Before use check machine, cable, and plug for any damages or

material fatigue. Repairs should only be carried out by authorised

Service Agents.

Only plug-in when machine is switched o.

Keep mains lead clear from working range of the machine.

Ensure that the machine is always stable and secure.

Do not use saw blades which are damaged or deformed

Only use saw blades which have been properly sharpened.

Do not use saw blades not corresponding to the key data given in

these instructions for use.

The teeth thickness, or the set of the teeth must be thicker than the

body of the blade and the riving knife. Do not remove the riving knife.

To minimise noise, the tool must be sharpened and all noise reducing

elements (covers etc.) must be properly adjusted.

Only use tools that meet standard EN 847-1.

Transport and store the tools in a suitable receptacle;

It is necessary to select a saw blade which is suitable for the material

being cut.

It is essential to adhere to the maximum speed specied on the saw

blade.

Do not use saw blades made of high-speed steel.

Do not use any anges other than those supplied or indicated in the

instruction manual to secure the saw blade.

REMOVE ADJUSTING KEYS AND WRENCHES. From habit of checking to

see that keys and adjusting wrenches are removed from tool before

turning it “ON”.

Never use the Circular table saw to cut materials other than those

specied in the instruction manual.

Stock having a round or irregular cross section (such as rewood)

must not be cut, as it can not be securely held during cutting. When

sawing thin stock layed on edge, a suitable auxilary fence must be

used for rm support.

Any faults with the machine, including any related to the safeguard

or the saw blades, must be reported to the persons in charge of safety

as soon as the faults are discovered.

Do not use circular saws for cutting slots (grooves in workpiece).

Cutting rebates or grooves is only permitted with a suitable protective

device  tted, e.g. a protective tunnel over the saw table.

Before using the tool please read the instructions. If possible have the

tool demonstrated.

Always use the protective shields on the machine.

Only use the circular table saw with guards in good working order

and properly maintained, and in position.

Do not clamp the protective swing guard.

Never reach into the danger area of the plane when it is running.

Sawdust and splinters must not be removed while the machine is

running.

Refrain from removing any cut-os or other parts of the workpiece

from the cutting area whilst the machine is running and the saw

head is not in the rest position.

When blade is binding, or when interrupting a cut for any reason,

release the trigger and hold the saw motionless in the material until

the blade comes to a complete stop. Never attempt to remove the

saw from the work or pull the saw backward while the blade is in

motion or kickback may occur. Investigate and take corrective actions

to eliminate the cause of blade binding.

For security, use devices such as safety- and pressure device, guide

slide, rip fence, etc.

Support panels or any oversized workpiece to minimize the risk of

wheel pinching and kickback. Large workpieces tend to sag under

their own weight. Supports must be placed under the workpiece near

the line of cut and near the edge of the workpiece on both sides of

the wheel.

Keeping rip fence parallel to the saw blade.

MOVE the rip fence out of the way when cross-cutting.

Keep the oor area free of loose material e.g. chips and cut-os.

TECHNICAL DATA Circular table saw

AEG TS 250 K Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info