135583
69
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
5 EN
Other Connections
Euro Scart (AV) Sockets
Your VCR is provided with two Scart sockets which you may
connect to other external devices with Scart sockets. We
recommend this connection to ensure a better audio and
picture quality.
Euro Scart cables are obtainable at your dealer.
AV1 (TV) Connection to TV
If your TV has Scart sockets, you may connect your VCR’s
AV1 (TV) scart socket to the Scart socket on the back of your
TV. Please see the instruction manual for your TV.
Note: You may connect the VCR to your audio amplifier.
1) Prepare an audio cable (not supplied).
2) Switch off your audio amplifier.
3) Insert one end of the audio cable into the corresponding
red and white AUDIO OUTPUT L/R socket at the back
of the video recorder and the other end into the
corresponding audio input socket at the audio amplifier.
AV2 (DECODER) Connection for Other External Devices
The second Scart socket AV2 (DECODER) is designated for
other external devices, e.g. decoder, another VCR, video
camera and so on.
Note: If you want to connect a TV with Scart socket to your
VCR, the TV must be connected to the VCR through
AV1 (TV). A connection to AV2 (DECODER) will not
function correctly.
AV Front Terminals
When you copy a video tape, or watch a programme recorded
on an another source, use the AUDIO/VIDEO input jacks on
the front panel of the VCR.
Note: When you connect a monaural VCR (another source)
to this VCR, connect the audio output jack of the
monaural VCR (another source) to the AUDIO L jack
of this VCR. The audio signal will be recorded in both
L and R channel equally.
External Input Mode
To receive the signal from an external source (decoder, video
camera, another VCR, etc.), connect the source to the AV2
(DECODER) socket, and press
CHANNEL (o/p) or enter
“002” with the
number buttons. “AV2” appears on the TV
screen. If you use the AV1 (TV) socket, press
CHANNEL (o/p) or enter “001” with the number buttons.
“AV1” appears on the TV screen.
If you use the front AUDIO/VIDEO input jacks, press
CHANNEL (o/p) or enter “003” with the number buttons.
“AV3” appears on the TV screen.
Initial Settings
Selecting the Language
The following steps should only be performed if there is a
power failure or if the VCR is unplugged for more than 30
seconds.
Use the remote control for this procedure.
1) Turn on the TV and select the video channel on the TV.
2) Press
FUNCTION.
3) Press
PLAY/o or STOP/L repeatedly to select your desired
language.
4) Press
MENU.
Changing the Language
If you want to change the language used on the TV screen
menus, follow the steps below.
Use the remote control for this procedure.
1) Press
MENU.
2) Press
PLAY/o or STOP/L to select “INITIAL”, then press
F.FWD/B.
3) Press
PLAY/o or STOP/L to select “LANGUAGE”, then
press
F.FWD/B.
4) Press
PLAY/o or STOP/L repeatedly to select your desired
language.
AV2 (DECODER) AV1 (TV)
AUDIO
OUTPUT
AERIAL
RF OUT
R
L
AV1 (TV)
to 21-Pin
to 21-Pin Scart Jack
Decoder (Not supplied)
(TV)
to RF OUT
to aerial
socket
Scart Jack
[Back of the VCR]
L
R
AUDIO
OUTPUT
VIDEO L AUDIO R
[Front of the VCR]
etc.
To the audio
output jack
[Another source]
To the video
output jack
Audio/Video
cables
(not supplied)
LANGUAGE
DEUTSCH
ITALIANO
ESPAÑOL
NEDERLANDS
FRANÇAIS
SVENSKA
ENGLISH
[ ]
HG462ED(EN).fm Page 5 Wednesday, March 3, 2004 7:49 PM
69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für AEG vcr 4500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info