Bedienungsanleitung AEG vcr 4505 (Seite 76 von 80) (Deutsch)

135582

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Connect the recording VCR (this unit), playing VCR (another

VCR) and your TV as outline in the following diagram.

1) Insert a pre-recorded videocassette into the playing VCR.

2) Insert a blank videocassette, or one you want to record

over, into the cassette compartment of the recording

VCR.

3) Press

SPEED/SYSTEM on the remote control to select the

desired recording speed (SP/LP).

4) Select “AV2” position on the recording VCR. See “Other

Connections”.

5) Press

REC/OTR on the recording VCR.

6) Begin playback of the tape in the playing VCR.

7) To stop recording, press STOP/EJECT on the recording

VCR, then stop playback of the tape in the playing VCR.

Note: • For best results during dubbing, use the VCR’s front

panel controls whenever possible. The remote control

might affect the playback VCR's operation.

• If video or colour fades in and out, you may be

copying a copy guarded video tape.

To Monitor the Recording

Turn on the TV and select the video channel on the TV.

A Status Display

To check the Counter, or Clock & Channel number, press

DISPLAY. Each time you press DISPLAY, TV screen will

change as illustrated:

When you select the channel using the number buttons, select

the desired channel (position number).

Note: If the on screen display or indicators on the front panel

show an abnormal reading or no reading, unplug the

VCR for 2 minutes, then replug it again.

Please note that language, clock, and timer settings will

be cleared after disconnection.

Maintenance

Cabinet Cleaning

• Wipe the front panel and other exterior surfaces of the

VCR with a soft cloth that has been immersed in lukewarm

water and wrung dry.

• Never use a solvent or alcohol. Do not spray insecticide

liquid near the VCR. Such chemicals may cause damage

and discolouration to the exposed surfaces.

Auto Head Cleaning

• This feature automatically cleans the heads as you insert or

remove a cassette to ensure a clear picture.

• The playback picture may become blurred or interrupted

even if the TV programme received is clear. This does not

mean that the recorded programme has been erased. This

problem is caused by dirt accumulated on the head after

long periods of use, or usage of rental or old tapes. In this

case, head cleaning requires highly technical expertise and

the nearest dealer should therefore be consulted. Clean

heads only when problems occur.

Service

Should your VCR become inoperative, do not try to correct

the problem by yourself. There are no user-serviceable parts

inside. Turn the unit off, unplug the power cord, and take the

unit to a Service Centre for servicing.

RF OUT

AERIAL

AV2(DECODER) AV1(TV)

to RF OUT

to aerial

socket

[Source (Playing) VCR <Monaural>]

(another VCR)

to 21-Pin

Scart Jack

[TV set]

(Use for monitoring)

[Editing (Recording) VCR]

(this unit)

Coaxial cable (supplied)

■

0:12:34

■

17:40

P02

<CLOCK and CHANNEL

NUMBER mode>

Press once. Press once.

Press once.

HG210ED(EN).fm Page 12 Tuesday, March 2, 2004 4:08 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG vcr 4505 Seite 76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info